JD2 Dies

Im thinking I want to order the 1 3/4" die set with the bender but theres multiple dies which one is the best? Or do I need more then one.

a lil off line but,,, 1 5/8 and 1 3/4 are the only ones that NHRA reconizes for the cages and roll bars...

If only one=1.75, if getting two=1.5 and 1.75.

Unless you are doing racecar cert cages, dont buy a 1.625, you will never use it. its an odd size tube.

Im pretty sure I want the 1 3/4 but I don't know which radius to get. Or what the other numbers are for.

I got the 1.75 with a 5.5radius and dont remember the # but it was the one that gets you farther around in degrees. Find someone close to you that has a jd2 and buy a die that they dont have, then you can swap dies and save both of you $$. Use $500 woth of dies for $250:awesomework:

Any one have a jd2 in federal way?

i do, with 1.75" 5.5Radius die too:fawkdancesmiley:

CHOP SHOP said:

If only one=1.75, if getting two=1.5 and 1.75.

Unless you are doing racecar cert cages, dont buy a 1.625, you will never use it. its an odd size tube.

Click to expand...

Is a good way to make $140-175 per point.:awesomework: