s&n fab 3 seat bravo revamp

so a week or so ago my brother brought his chassis over to my place to go under the knife
its been rolled several times really hard and the roof was about an inch out of square or so plus he wanted to change some other things
list of things to change before koh
fix passenger a pillar...................................................done
resquare the roof.......................................................done
cut out all the center passthrough that came on the three seat chassis.....................................................................done
x brace the new center area.........................................done
remove third seat.......................................................done
remove fuel cell and build new one
cut out winch and re mount it.........................................done
shorten the back 4"......................................................done
shorten the front 6".....................................................done
rework the entire nose to fit the car more style................done
cut all roof supports out and redo in x fassion....................done
remount battery.........................................................done
remount trans cooler...................................................done
make a rear deck to strap stuff to
remove rear bump stops to gain more up travel................done
redo rear shock mounts to gain more droop.....................done
redo radiator mount so the hood can be pushed back 3"....done
and then redo all the panels

Lets see the pics man i know you guys have started cuting already :corn:

Which rig is this? Lets see some pics!:corn:

some pics of the car when it came

search for my new to the board thread and you can see a pic of it when it was first done

progress in order i think

more

still more

last

forgot one

lookin good I think the caddy hood needs some glitter paint:redneck:

chevota said:

so a week or so ago my brother brought his chassis over to my place to go under the knife
its been rolled several times really hard and the roof was about an inch out of square or so plus he wanted to change some other things
list of things to change before koh
fix passenger a pillar...................................................done
resquare the roof.......................................................done
cut out all the center passthrough that came on the three seat chassis.....................................................................done
x brace the new center area.........................................done
remove third seat.......................................................done
remove fuel cell and build new one
cut out winch and re mount it
shorten the back 4"......................................................done
shorten the front 6".....................................................done
rework the entire nose to fit the car more style
cut all roof supports out and redo in x fassion....................done
remount battery
remount trans cooler
make a rear deck to strap stuff to
remove rear bump stops to gain more up travel................done
redo rear shock mounts to gain more droop
redo radiator mount so the hood can be pushed back 3"
and then redo all the panels

Click to expand...

Damb you boys have been busy!!!!!:rockon:

What rear end is that?? Ford Van 35-spline, SF 60?

Does he run it offset or did he shorten the long side?


Nice work.

sweet! . I love the caddy front, that thing is going to be baller!!!

You guys really stripped her down:awesomework: Cadaliac grills......look at the oil my Cadaliac spills:haha:

Lookin good Nate,

I just put together a hydraulic bender. You should come give me some pointers sometime.

Ben

Binder said:

Which rig is this? Lets see some pics!:corn:

Click to expand...

This is one of the cars you dont see very often because the owner dosnt wheel!:rb:

The times it has been wheeled it seemed to get ****ed up more and more, This rebuild/revamp was long over due!

X2 on the glitter paint:redneck:

mark said:

What rear end is that?? Ford Van 35-spline, SF 60?

Does he run it offset or did he shorten the long side?


Nice work.

Click to expand...

probably just a regular 60 housing that s&n welded 9" housing ends on

Cascade_Crawler said:

probably just a regular 60 housing that s&n welded 9" housing ends on

Click to expand...

no it was originally a van housing
c clip is :rb:
he needs to do a semi float conversion on the rear