-
Help Support Hardline Crawlers :
Queston for you buggy guys with D-60s
- Thread starter bigdog165511
- Start date
PORTER
Well-Known Member
I could say something but I will be a nice guy and not.:haha::haha::haha::fawkdancesmiley:Makes me look like a badass when i school porter on the crazy technical verticle stuff.
Please do......:corn:
Everything is a factor. Wheel- width tire-size frame-width. wheel base Trailer width. But if you take your time with a tape measure. n a pad. It can turn out spot on perfect.
I have a buggy based off a cj5 dana 60s 44 "boggers 105 wheelbase. It drives right on a standard car trailer. tires dont hit the frame when turning right tight. And its stable and works well.:awesomework:
I have a buggy based off a cj5 dana 60s 44 "boggers 105 wheelbase. It drives right on a standard car trailer. tires dont hit the frame when turning right tight. And its stable and works well.:awesomework:
That was a friend on my computer...
mark
Well-Known Member
CRAZYS
Well-Known Member
Go Full width. Play with you backspacing on your wheels to get it were you want to be.:awesomework:
Can't remember the numbers but I am full width with 2" wheel spacers and stock offset H1 12 bolts.
Can't remember the numbers but I am full width with 2" wheel spacers and stock offset H1 12 bolts.
Uh huh.:fawkdancesmiley:
my buggy is roughly 82" front, from outside to outside tire. How do you think it will fit in the NW trails, ie elbe, and evans? Haven't ran this in the trail yet, just seeing how it will fit.
Running 44 up front, 14b in the rear on 39.5TSL x15" wide
Running 44 up front, 14b in the rear on 39.5TSL x15" wide
PORTER
Well-Known Member
Show him the back of your hand Bunko.
WHITE TRASH1
fruit stripe
You've gotta be way wider than that... I'm on stock GM with 44" tsl's which are way narrower than your boggers and 3 3/4" backspaced 15x10's with DIY beadlocks and I'm right about 91 1/2"
Show him the back of your hand Bunko.
Once i saw it i laughed. He knows about me fawking with ya..
