Search results for query: *

  • Users: Beerj
  • Content: Threads
  • Order by date
  1. Beerj

    Re-venge YJ Tons Swap

    Built this 89 yj over the past few years so the wife could follow us around and so both of our kids could wheel with us. Last summer was the first it was out and it did well for what it is. But being on 35's and leafs, it was a rough ride and although she could follow on the connecting trails...
  2. Beerj

    SD60 Replacement Stud Length?

    I've redrilled a set of these hubs once before but can't remember what studs I used. Can't seem to find any info online either. I'm seeing Dorman 610-347 a lot but those are just a 9/16 x 18 version of the stock studs, which are all but 3" long. Then you lose another ⅞ till you get through the...
  3. Beerj

    (5) 35x12.5R17 Pit Bull ATX tires on Fuel Anza wheels

    (5) Pit Bull ATX 35x12.50R17 tires on Fuel Anza 17x8.5 wheels, anthracite color. 4½" backspacing, 5x4.5 pattern (xj, yj, tj) Only used on 3 light wheeling trips. No plugs, patches, gouges etc. Wheels have a few scuffs/ scratches on the simulated beadlock rings. Spare wheel and tire have never...
  4. Beerj

    Transmission cooler in front of radiator?

    Recently upgraded my radiator fans and the engine temp doesn't seem to flinch anymore for the most part. On one beatdown the trans actually got hotter than the coolant. That's a first for me. I've got a derale stacked plate trans cooler but now I'm wondering if maybe I should just mount a cooler...
  5. Beerj

    30'+ Gooseneck Trailer

    Just seeing what's out there for open deck trailers. Need 30' but would go as big as 40'. Also prefer tandem duals. I'm in PA but would be willing to drive for a deal. So if y'all have one or know of any, let me know! Thanks
  6. Beerj

    5.3 No throttle

    Just finished my gen 3 5.3 swap in my yj using a PSI conversions harness. This engine is dbw. Starts and runs fine but after a couple of blips of the throttle, I lose all throttle response and the pedal is essentially dead. Throws a U0107 code which from my research is indicating a possible...
  7. Beerj

    GM pump to YJ steering box.

    Does anyone know of anywhere that carries conversion lines to connect a truck (5.3L) steering pump to a YJ steering box? Or at least what size/type fittings are on both ends? At least then I could get a set made.
  8. Beerj

    Gasket or RTV?

    Got my trans from PTC and the pan leaked right away. Found a hunk of oily dirt between the trans and gasket, no big deal, **** happens. I didn't have a gasket on hand so laid down a bead of rtv. Reassembled and still leaked at the pan. Pulled it again and went with a moroso gasket since I had...
  9. Beerj

    Trans Cooler Question

    Currently have a Derale 2 row cooler with fan on my th400. Seemed to do fine when the trans was stock but when I upgraded, ptc spec'd out a 3k converter which likes to build up quite a bit of heat when trying to crawl stuff. I have a 2nd trans cooler that is basically the same thing but only...
  10. Beerj

    Now a question for the th400 guys...

    So let's get this out of the way first, I'm an idiot. :****: Was trying to find the source of a small trans leak (ptc th400 fmrv) and thought it might have been the plug where the vacuum modulator used to be. So I removed the retainer, wiped it down and waited to see if it leaked. In the...
  11. Beerj

    Anyone ever rebuilt a psc double ended ram?

    One of my seals is leaking pretty badly. I've got what looks to be a rebuild kit for the entire ram but I'm short on time so was just going to do the one outside seal for now. Is it just as simple as removing the clevis and unscrewing the cap at the end? If so, I think I could probably do it...
  12. Beerj

    Th400 Stickout Question

    Planning on ordering a new trans soon (hopefully today) but I wasn't smart enough to write down what my output shaft stickout was. What I do know is I've got the standard th400 to atlas adapter plus a 1" spacer right now. My research tells me I probably have the ~2.5" output stickout. Does this...
  13. Beerj

    Jeep 4.0 running like poo

    I know some of y'all are/were jeep guys. I've got a 94' yj 4.0 that is running like it's missing across all rpms. Starts fine and idles fine (except for the miss). The jeep sat for quite some time but I made sure to start it every month or so. Back in August I went to move it to a friend's house...
  14. Beerj

    Front mounted coolant overflow?

    Anyone ever mounted one up front on a rig with a rear mounted radiator? Idling level or facing downhill mine does fine. However, facing uphill at idle, the temps climb. Raising the rpm's brings the temp back down but I'm not 100% sure yet if that trend will stay of if it will eventually stop...
  15. Beerj

    LS knock sensor wiring

    So I was doing a real good job about not botching anything when I pulled my engine yesterday. That is, until I snagged the knock sensor plug on the harness. Pulled the connector right off. It's 2 blue wires, both look identical. Does anyone here know if it makes a difference which side of the...
  16. Beerj

    Sold/Expired 1994 YJ (UPDATED PICS)

    Testing the waters a little. 1994 YJ 4.0, AX15, NP231 Recently rebuilt trans and Tcase, 231 has an sye D44 rear with a Yukon Ziplocker HPD30 front with an Aussie locker and chromo shafts Both geared to 4.10 4.5" Rubicon Express Lift JKS telescopic track bar in front Rustys Offroad Tierod and...
  17. Beerj

    Fuel Pumps That Suck

    Finally started really tearing into the wifes yj. It originally had the carbed 4.2 so there's no in-tank pump, just a pick-up in the middle of the tank. I grabbed the same Walbro inline pump that everyone uses for an ls swap. Do you guys think it will live if it has to draw fuel up out of the...
  18. Beerj

    Th350 Rebuild help

    I finally got around to rebuilding the th350 for the wifes jeep. I never built a trans before or ever even had one apart. With the help of a kit from jakes and a couple of youtube videos, I've nearly made it to the end. The only problem I see is I have 1 ring/spacer leftover. I know enough to...
  19. Beerj

    LS Running Issues (RESOLVED)

    So I've had this issue since the last time out. Seems like once the engine warms up it develops a massive miss. Almost seems like the entire passenger side isn't firing. While driving it like that, you don't even really hear anything coming out of the exhaust on that side but if you just stay on...
  20. Beerj

    RCV ?'s

    Thanks to the recent boot thread, I have some good ideas how to get them on. But now I have 2 questions. I noticed 1 end of the inners has a snap ring on the end. Is that the side that goes into the bell? Also, what is this tool?

Latest posts

Back
Top