Search results for query: *

Ok. tube bending gurus... I have a question about bending some tube. I have to bend some 7/8" aluminum tubing for a project... I am using my JD2 Model 32 bender, die is being shipped as I type. The die is a 3" CLR 180*. My question is this... Is there an easy way to figure out...

Ok.. so, my CEL came on for the first time in my Chev Truck... Put on the scan tool and get the code and i get the following code: P0894 - Generic - Transmission Component Slipping pic: so.. I have done a bunch of internet searching, to find out that no one really knows what it is that...

I am looking at getting a reader/scanner... the problem is, i don't want to spend a fortune on one... it is not something that i will be using every day... I want to be able to diagnose codes, if/when a CEL comes on.. clear them if needed, and any other goodies that might go along with...

well, today i just picked up my newest project, of the many i seem to have accumulated... :haha: Here is a quick shot of the way it sits right now... (I will take more shots in the next day or so) The Plans...... strip it down to the bare frame and turn it into a gooseneck trailer to haul...

ok.. so my buddy is having troubles with his truck... this is his rig... 2008 Dodge 3500 dually, 6.7L Cummins Turbo 108k miles... he took it in for an oil change today and an inquiry as to why his engine light has been coming on... they told him his turbo needs to be replaced and they...

OK.. so far, from what I have read, this is nothing short of a pain in the ASS :mad: :mad: does anyone have any tips, tricks, etc that may help in this project?? and any estimation on about how long it will take?? looking like a full day at least... unless there is some faster way to do it...

So... I have been without a decent place to work on my rig for a long time. The tent-shacks can only go so far, and a dirt/gravel floor just blows chunks!!! :puke: it makes even the simplest of tasks a challenge!!! :mad: So, I have come to some choices. Choice #1... go through all the...

I have an opportunity to aquire a plasma cutter, it is a Miller Spectum 187... has anyone had any experience with this unit??? is it worth getting, would it be able to cut a piece out of 1/4" steel or is 3/16" absolutely the max of this unit???? just want to know before I go forward with the...

Trail Maps... Below is a list of Maps that I have been collecting for a while... I try to update them as often as I can, so hopefully they are fairly current... If there are some maps that you want in the list that I might not have, or you have a better one, let me know and I will try to...

NW Forest Use Pass.... Listed below is some information about this pass. The locations are grouped by National Forest Names and broken down within to individual areas. Also note that this list is not just for people using OHVs, this list is for those also using other trails and facilities...

Here is a link to a Map that shows the DNR locations statewide that require the new Discovery Pass... it is in PDF format, so make sure you have a reader... Discover_Pass_DNR_Locations.pdf Hope this helps anyone with questions... just look for your location on the map and go from there... :D

Well, since the jeep

ok... so, I am finally getting a chance to tear apart my Jeep, take out the 304, which runs great - just not what i want, and replacing it with the 350 Chev that I picked up from japerry back in January... so, now to my question... since I have not really messed around with these much, I...

So... I finally got rid of my 2005 mustang for a much needed and overdue truck/ tow rig... I ended up getting a 2007 chevy 2500hd. It is a gasser. 6.0 But it is good shape... I will post a pic as soon as I can.... :awesomework: Here is a pic: :D

OK, so I have some woods on the back part of my property... so it has been about 4 years since I have had any vehicles back in the woods... most of it has been grown over.. down trees from the storm, etc. well since I finally got my tires mounted up on the jeep, I figured why not try them...

I am looking for someone that would not mind taking a couple of people around up at Naches Trails... I have not been there is soo many years, I have forgotten my way around. I don't want to get into anything too crazy.. just want to have some fun for the day with some good people... anyone up...

Is there anything planned by anyone on Nov 17th?? I have not seen any posts of one yet, or I just missed it cause I am a retard.. LOL I have someone that wants to go out wheeling, and I wanted to tag along if someone had something planned like maybe at Evan's Creek, Naches, or Elbe maybe...

Well, I was asked to help do some work for Kid Skid's flattie... this is what it looked like minutes before the work started: This is his first Jeep and he is happy as hell and eagar as hell to start working on this rig. We mocked up a low-budget redneck rti ramp (consisting of...

Wheel question for all you guys running beadlocks and such..:D I have purchased a new set of tires for my jeep... I got TSL 33x12.5x15 (bias plys) wanted to go larger but trying to keep this rig a little reasonable to get in. My question is.. I want to put beadlocks on so I can run lower...