Search results for query: *

WANTED 14bolt ring and pinion 4.56 gear Or possibly complete stock rear with 4.56s if price is right. Located in southern middle TN

I need a 14 BOLT Yoke, w/ubolt straps, 1350 joint Asking here before I buy a new one. PM or txt is faster 931-3061580

Im looking for a set of Beadlocks for my Jeep TJ, or any 5 lug pattern will work, as I dont mind adapters. Would also be interested in a set of 35-36" tires, preferably swampers, but will look at whatever. txt/call me at 931-306-1580 or message me here Im located in southern middle...

-- SOLD-- I sold the 02 so now I just have the 97 and soft top. 1997 Jeep wrangler TJ , 4cyl, 5speed. 155k miles, Runs and drives, 4x4 works fine. 1.5" body lift, 31" tires. Good black soft top with it. Only rust on the jeep is under the windshield frame. Good title in hand. Its dirty in...

I need a front cover from an external slave AX5. I am trying to get my TJ put back together and the trans that came with it was an older model with the internal slave, I have everything to go back with the external setup except the right front cover that has the throw out bearing sleeve made...

I need a set of D60 top plates and u-bolts. Just bought a project that has the axle just thrown under it with no hardware, and of course I just sold a complete chassie with everything I needed, anyone have a set laying around?

I am looking to see if there is anyone on here that hotshots or would be interested in picking up a truck for me. its in the Little Rock area, (72120) and Im in southern middle TN (38471). Its a old square body crew cab with a short bed. Its a rolling chassis. i currently dont have a...

I have a set of Chevy tons, still under a lwb C&C frame. D60 front (open) and 14bolt C&C rear (gov loc I think). 3.73 gears. AXLES SOLD PENDING PICKUP $1000 Have a sm465 4speed transmission mated to a Round pattern 205. $500 Also have a skirted Gooseneck Brand flatbed. $450 Would take...

I'm looking to fix up my 02 Jeep TJ. My frame is rusted and the 4cy is tapping pretty good. Would like to find a decent frame. Also would be interested in some deeper geared axles or a set of gears. and a good 4cy or might look at doing a 6cy swap. I'm located in southern middle TN near...

88 Chevy 4x4 Cab and Chassis ton. Good title. Its pretty much all original except for the motor. Its been converted to carb, its got a 305 in it that smokes and has a miss, and leaks oil. Some wiring issues, toggle on the coil to kill the motor, and no tail lights. Truck does run and drive...

I know its a long shot but figured I would see if anyone wanted to swap to a higher geared set of tons. Im looking for 4.10s or 4.56s. I bought a truck for the axles only to find out they are 3.73s, its a 88 model Cab and Chassis ton, the front is a D60 dually 77" WMS, the rear is a Cab and...

******* SOLD ******* 1995 Jeep Wrangler YJ with 4cyl and 5speed, (185K miles), no rust in tub , frame has some surface rust but nothing through the frame. Has some dings in the hood, one on the tail gate. One small crack in the front fender, and missing a hood latch. It pulled out the other...

*******SOLD******* Update - the Pre-Christmas Tornado destroyed my tow rig so I'm looking to replace it, either with an newer rig or an older diesel or gas burner. I have the jeep and cash for something nice like I'm looking for (04+ crew 4x4 diesel dmax or cummins) or possibly trade for a...

[color=red]Sold./color] Buggy built this year, not by me but a guy that does dirt car cages, 1.75" DOM tube cage, built off of part of a K5 frame. TBI350 motor, th350 trans and 203 transfer. D44 front axle open diff, 12Bolt rear welded. Unsure of gears but assuming 3.08 or 3.73 as they are...

-SOLD EVERYTHING - ---$1600 for the set of axles, All the rims/tires are sold---- 2.5ton Rockwells, one front and one rear. Both welded. Wilwood pinion brakes. Steering ram on front. Rear has a top hat for 4link. Lower link tabs were cut off. They are currently set up on leafs...

I need a 44 for a 16.5 rim. Would prefer a bogger, I have one new one and 2 about 50%, would like to find one somewhere in between. Somewhere near the northwest corner of Alabama or middle Tennessee. I'm in Lutts.TN My number is 9313061580

Im thinking about buying a new trailer, or maybe a used one, but after shopping around on craigslist I have seen a few that are priced new for not much more than what some folks are asking for a used one. I am looking for a 18, 20, or 22 ft bumper pull with a steel deck. I'm not opposed to the...

- 1998 Jeep TJ wrangler sport, 4.0 6cyl. 5 speed. 134k miles. Full Soft top in decent shape. Its got a YJ hardtop on it in the pictures and it dosent fit just perfect around the windshield, needs just a bit more trimming. Its stock except for cold air intake, turbo exhaust, jet performance...

Looking to buy a set of dedicated trailer tie downs, something lighter than my chains and binders, to keep in the tow rig so I don't have to hunt them up. I've looked at Summit/Jegs and at the Macs ones, which look to be the best but just not sure if there are any i'm missing or same quality...

--SOLD-- -Reduced to $5500 firm, or trade for a leveled or lifted ext-cab or Tahoe of similar year or condition, possible small amount of boot for something nicer. 2001 Chevy 2500HD 4x4, Crew Cab with a 03 front clip, 166k Miles, It has the big 8.1 motor (gas burner), Allison 5speed...