Search results for query: *

I have a couple HF tools that work for little bit I use them, I just picked up a biscuit joiner last weekend so I can make a couple table tops. Ive been looking for a small 1/4 SAE socket set that is easy to pack in a tool bag too so I can get rid of carrying nut drivers but im having a hard...

That's the main reason the majority of my tools are Klein since Platt has good prices and an apprentice discount. For the price the Wiha or Wera screw driver sets are actually cheaper than Klein and they look comfy but I cant find them locally to get my hands on them. I will have to swing by...

Do you use Klein screw drivers? I heard from a buddy that the Wera screw drivers are the bees knees compared to Klein. I need to stop by that little hardware store by the U district again, I think they had the Wera and Wiha screw drivers there.

Most my tools are Klein now. I do commercial electrical work so all the tools im looking for are for work. The Knipex Cobra pliers are easier to use then the channel locks and the teeth are still there. Im happy I made the switch a year ago. Right now im mainly needing to replace my dykes...

Im talking about pliers, screwdrivers, dykes. Do you try and buy American made only? Do you order stuff online or from a store? Ive been having good luck with German made hand tools over the American made stuff lately and wanted to know where you guys stand. I have been digging my knipex...

FAIL on reinstalling that axle like trashy said.

EMT is sufficient ground no need to throw your money away just have the device pigtailed to the box. We only pull grounds when its spec'd in pipe or if we had to use flex somewhere.

1 1/4 is what I came up with for the min. size. Are you planning on running EMT to the box's/device from your panel?

Im guessing it is not permitted, those handy boxes are only good for 3 #8's. To be to code you should have used 4 square box's instead.

OK that makes more sense, did you just have the #8 laying around? #8's are rated at like 40 amps which is overkill for some outlets and lights but makes sense for the compressor.

Hey Mike what is the point in having that 90 that comes out of the 4square and runs to the panel if that lower run is coming out of the panel as well?

I have a line ona 3.4 out of a 98 runner with an auto everything I want off the truck for $600 but it has about 218k on it. Im really debating on picking it up for the future.

Well....The jetta is a POS:puke: everything is $$$ to replace and the motor is knocking like a son of a bitch. The speedo/tach work when they want which is when the car is "cold" Long story short I hate that car:awesomework:

Who here is familiar with working on the toyota 3.0 v6? Im about to sell my Jetta and want to makesure the 3.0 is running top notch since ill be driving from bellevue to north bend 5 times a week for work with it. Im mainely lookig for a shop to just look through it andlet me know what needed...

Ide run them as is and just check them periodically to make sure there not seperating. If I had a set of 17's ide buy them. I worked at schwab and we run into torn bead all the time in the winter rush from having to mount old tires(10-15) years old. My buddy has a set of new toyo's that we...

I bet that trecel rallys:awesomework: I got the front end all buttoned up and its in the truck now and I threw a 4.10 diff in the rear so my gear sets match. Now im waitingona buddy to come over so i can bleed my brakes then im out to run around in the snow:awesomework:

Came home today to some presents from the brown man. Finally got my elocker gueard and all the new studs for the diff and my knuckle rebuild kit and backing plate eliminators. Got the elocker diff and everything in to the point were I need to put the knuckles out on and go out side for a quick...

Here is some pics of the finished dash and the rats nest of wireing I need to reroute tomorrow and make awhole lot cleaner. I still have to wire in the elocker and some rock lights hence the two empty holes in the dash for the toggles. Im not excited to clean all this mess up but it needs...

Ok arron do you want me to get it put together for you first or do you want to come get it as is:fawkdancesmiley: Did you ever SAS it yet or are you still collecting parts? Ill have my front v6 third with 5.29's and a lockrite for sale probably next week and some other front axle parts. If...

Well I got my dash all finished up and the truck should be back at my house monday. Im on a new leg of the build and with my crap front driveline angle I decided to go with a high pinion. I picked up a shaved and trussed housing off rivercat and had it soda blasted and then primered/painted...