Search results for query: *

5.3 to a nv4500 np205 combo with 5.38’s is plenty low for crawling. From my experience.

It’s in alarm mode but unfortunately I don’t know how to help. But daughters did the same thing

I use a Parker 3 way valve plumbed in to back brake line. Push brake petal turn valve and back brakes are locked. Valve was like $40?? Offroad connection

I saw that and thought the same thing!

I went to gmp earlier this year and wow what some hills. Started to unload rig and just drive it :woody:

That's a big smile!

Your 29 has a sir meter flip 1 St rocker switch on left down to swr call then hold mic trigger on watch meter 1 is the best! To bring swr down turn the knob on far right says swr call both ways till swr reads 1. Also cut the talk back on same knob to make sure speaker is working :cougar:

Leave the front axle alone buy a 3/4" clocking plate from jb conv $75 bucks run a Dana 300

If you installed the rubber seal/ wiper on the stub shaft the snap ring keeps it pulled tight so no mud or grit can easily get in!

try pushing the stub shaft out at the knuckle!

Any response from Blackbear yet?

Bitch is bad!!! Just curious what's the price tag?

I went to local bike shop they had nice small levers, like a trigger. But now I run a pto cable so I can hold high idle during winching.

Just curious how you flushed the fluid? I put a steering sector on my dodge tow pig and bled the system on jack stands without it running and I think I got the pump due to air. Mine is hydro boost I have good brakes or good steering but not both at the same time.

To to autozone rent a vacuum gun apply vacuum to lock off and start if everything runs and idles then diaphragms are ok.

Haven't read all of post but ran a similar propane setup and when the vaporizer needed rebuilt it wouldn't start. I could cut the valve off on the tank and it would try to start. Propane floods the motor very quick. May not be our problem but mine drove me crazy went Ridin then came home to no...

Jim will surprise you, plus its free!

That's a Marty Mcfly edition!!!

So your about $2.35 a pound thumb.gif Buggy looks great!

I know I know but why not go 4.3 to th350 it would be wider but shorter drivetrain with more power, but still in line for the d44s.