Search results for query: *

izuzu trooper disc,s and calipers and bolt on brackets from greg at best drivelines you dont have to ,but i used the trooper master, and threw away the stock porp,valve

mid 80s honda civic elec. fuel pump you can get them outta pull a part for about 6 bucks

i actually get to **** can a 14" long intermediate shaft ,, from the tranny to the transfer,, so it does make me a tad longer by 2" i can live with that i might have to shorten the rear D line the front i think i can get away with it its already got 11" of slip so i think i...

1 more

1 more

more pics brackets fabbed up to mate the 2 t cases together long arm modded and reinforced in 1st gear and low/low the main input shaft turns 15 revs to the 1 rev from the rear driveline

toy axles 5.29s arbs 1600, 8v tracker,,,, nope havent installed it yet i gotta go wheeling this weekend ill start putting it in soon after im looking at stock gears in both cases so i get hwy speeds back .... the gears should be plenty low enough with both cases over all this setup is 2"...

kinda like this ???? geo tracker 5 speed and t case with front output cut off and plated mated to a sami t case still haven't decided weather to run stock gears in the sami t case or my 4.16s

BEST DRIVELINES everett wa 513-8182 greg owns & runs the place half the $$$$$ of drivelines nw hes got stock thats twice the thickness or more of stock if its your daily driver/wheeler just have him make it out of the 9 ply if its your wheeler only go for the beef ! you;ll never twist it...

start the truck ,,,disconnect the neg side of the battery WHILE THE TRUCK IS RUNNING If the truck keeps running your alternator is good ! BUT YOUR battery IS NO GOOD IF THE TRUCK DIES WHEN YOU DISCONNECT THE BATTERY THEN YOUR ALTERNATOR IS DEAD and your battery is most like;y dead...

ive got izuzu trooper rear discs on my toy rear axle ,its mostly a bolt on job , the only fabbing you have to do is cutting the mounting brackets out of 1/2 inch steel plate and drilling the hole,s then it bolts up using 2 of the 4 bolts holding the axle in , the threads on the rubber lines are...

using 2lo is fine and you dont need to lock the hubs