skipnrocks
Well-Known Member
I caught my inner bead on a rock and bent it decent. I upped it off and used a bfh and straighted it out but not it had a slow leak. Should I just pull the tire and put rtv behind it?
Rtv never gets solid so it just fills the void. If it's bad enough it can still burp air. Pick up some bead sealer and put on it. Just don't get it on anything but the bead that **** don't come offSBJeepn said:I bent it pretty good. It caught one section of the bead and pealed it back about 2 inches, and the spread of the deformity was probably 4-5 inches making a v. A few good hits with a 10 lb hammer and it looks mostly straight but does leak slowly out right were the v was. It has a small wrinkle I cant work out of it. So I guess Ill clean it well and add some rtv and run it and see what happens.
SBJeepn said:I caught my inner bead on a rock and bent it decent. I upped it off and used a bfh and straighted it out but not it had a slow leak. Should I just pull the tire and put rtv behind it?