storminator
Well-Known Member
It worked fine but the box leaked like crazy so i pulled it out to rebuild it and it was too far gone to rebuild. picked up another box, drilled and tapped it, cleaned it replaced a few seals that were questionable. put it in and cycled and bleed it forever. started the truck up and let it run for a bit and then cycled it forever again trying to ensure no air was in the system. put the tires on the ground with the truck running and i have no power steering at all now. i do run the 1450 trail gear pump. could it be that the box is fawked up? it looked fine when i tore down to drill and tap. any help would be great guys. thanks