Lq4 cam swap ??

[Bj mac]

What cam are y'all guys running in your LS motor. I'm looking for a good sounding cam without having to run a stupid high stall.
My setup is a lq4 th350-205 with rockwells in a buggy.

 

[slytowncrawler2]

Gone need more than a cam lil buddy...... Got some packages from eagle headed my way for this 454 son.

 

[Bumpers]

Re: Re: Lq4 cam swap ??

Tsp has some good cam packages you can run .. anything with a 110-112lsa is gunna give you a choppier sound .. in low side the converter won't make as big of a difference because it tightens up so much more with the lower gearing.. you could run somthing in the low 220s on a 112lsa and be fine with a 2500 or so stall speed

 

[heepr]

Re:

TSP 224r, 112 lsa here. I'm running a manual so no converter concerns, but it pulls hard and makes good power on the low end and toward the middle of the rpm range.

 

[fl-krawler]

I have been using this one on a few builds. Seems to be a good mix of off idle power for crawling, and top end power for bouncing
http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=1092&sb=0

Here is a video of the idle quality
https://www.facebook.com/photo.php?v=666167243409904&set=vb.100000499020994&type=3&theater

 

[Glen1978]

A cheap one is a Z06 pull out.

 

[yankster]

Do a YouTube search for GM hot cam. I put that in the Bombshell buggy with a 3000 stall. It rips!

 

[yankster]

GM Hotcam

 

[IronsWorx]

I have this cam in my LS1 and it is awesome. great power and it turns on at 1200 RPM

It is a Howards Billet shaft

PN:190315-14

IN Exh Duration @.050" Lift IN Exh Lobe Seperation
260 264 210 214 .595 .598 114

Run this shaft with some LS7 lifters and a set of PAC valve springs and go

 

[Bj mac]

Thanks for the input guys. Im new to the LS world and was wanting to see
what y'all was using.