Well things finally have settled enough in my life now that I have time to do stuff during the weeknights other then unpacking and moving:cheer:
SO I oredered up a JD3 manual tubing bender with all the goodies:awesomework:
I picked up like 120ft or someting of 1 1/2 .250 wall and 140ft of 1 1/2 .120wall with some 1in and 1 1/4 in there to:beer:
So the whole idea is to build a 2 seater buggy thats reliable and fun 4links f/r but relatively cheap to build with miscelanous parts I have laying around:redneck:
So the plan as it stands now:
Ford 3/4ton axles HP dana44 and 60rear
400m motor
C6 tranny
203/205 doubler
4links F/R
37in crawlers
16in steel DIY beadlocks
PRP suspension seats, 5point harness
Coilovers
tripple stick(front digs)
Welded Rear, Detroit Front
20 gallon fuel cell
Cutting Brakes
Hydro assist, X-over steering
And alot of second guessing and making mistakes But all in all it will be a fun project to build and to drive:beer:
Our house was broken into last week all our electronis stolen, so on the 20th when I get paid I will be getting a camera and posting pics for you all immedialty:awesomework:
But I can give you some of the dimensions for an idea of the thing :corn:
109in WB
62in widest point
68in tall
20in belly clearance
113in Body length
:awesomework: thats all for now I dont want to spoil it!!!! But the main frame or the tube work that will be seeing rocks 24/7 and will be the main support for the whole buggy is .250 wall all the rest is .120
Wish me luck:corn:
Any imput would be very welcome:corn: :corn: :hi: :;
SO I oredered up a JD3 manual tubing bender with all the goodies:awesomework:
I picked up like 120ft or someting of 1 1/2 .250 wall and 140ft of 1 1/2 .120wall with some 1in and 1 1/4 in there to:beer:
So the whole idea is to build a 2 seater buggy thats reliable and fun 4links f/r but relatively cheap to build with miscelanous parts I have laying around:redneck:
So the plan as it stands now:
Ford 3/4ton axles HP dana44 and 60rear
400m motor
C6 tranny
203/205 doubler
4links F/R
37in crawlers
16in steel DIY beadlocks
PRP suspension seats, 5point harness
Coilovers
tripple stick(front digs)
Welded Rear, Detroit Front
20 gallon fuel cell
Cutting Brakes
Hydro assist, X-over steering
And alot of second guessing and making mistakes But all in all it will be a fun project to build and to drive:beer:
Our house was broken into last week all our electronis stolen, so on the 20th when I get paid I will be getting a camera and posting pics for you all immedialty:awesomework:
But I can give you some of the dimensions for an idea of the thing :corn:
109in WB
62in widest point
68in tall
20in belly clearance
113in Body length
:awesomework: thats all for now I dont want to spoil it!!!! But the main frame or the tube work that will be seeing rocks 24/7 and will be the main support for the whole buggy is .250 wall all the rest is .120
Wish me luck:corn:
Any imput would be very welcome:corn: :corn: :hi: :;