The Punisher Chassis Begins!

[mjp1080]

So I finally decided to play with the big boys and build a buggy. Sadly I had to deliver the big truck to the scrapper before I started on my new endevor, but it was a good learning experience and welding project. So here we go......

I designed my own chassis on bend tech pro, and built a new bender that is just begging to be used. The plan is to build a custom chassis out of 1 3/4 x .120 wall tubing, 2.5 ton Rockwell axles, double beadlocks, 44in tires, 500HP 383 stroker motor, 700R4 trans mated to a 205 twin sticked, single triangulated four link with FOA 18in coilovers. I'll try to keep this updated, here are a few pics to start. :redneck:

 

[War-Jeeper]

thats a very nice shop! This will be a cool project to watch

 

[Corey Y]

What is that machine in the background? Looks like a chainlink fence builder or something.

 

[mjp1080]

What is that machine in the background? Looks like a chainlink fence builder or something.

That is a door machine. it can prehang an interior door start to finish in about 90 seconds. We rebuild, refit and customise these for many different door shops across North America.

 

[charliesnyder]

How are you liking the GotTrikes.com bender so far? I have had plans for it for a while and just have never built it!

 

[mjp1080]

I really like the bender, the drawings were very complete and the finished product is plenty sturdy for anything I am going to bend.

 

[bobbed_84_toy]

I'll be watching this build as I am slowly gathering parts for a rockwell build. Can't wait to see some more progress

 

[traildemon]

Lookin good. Its nice to see that bender getting some use. :awesomework:

 

[NotSoPC]

:corn: Sucks the truck had to go:booo:

 

[gotrocks]

Looks like bend tech is working well for you. How do you like it so far?

 

[phew]

so does that bender use a jd die in it

 

[Jokenring]

so does that bender use a jd die in it

Pro Tools

 

[Harvester of Sorrow]

Huh...I knew exactly what those machines were when I saw them.

My Grandfather owned a door and cabinet shop in Yakima for many, many years. They had 4 or 5 of those style machines. They would cut, spray, and assemble the doors and casings.

Pretty cool to see them again.

 

[JoshC1]

So I finally decided to play with the big boys and build a buggy. Sadly I had to deliver the big truck to the scrapper before I started on my new endevor, but it was a good learning experience and welding project. So here we go......

I designed my own chassis on bend tech pro, and built a new bender that is just begging to be used. The plan is to build a custom chassis out of 1 3/4 x .120 wall tubing, 2.5 ton Rockwell axles, double beadlocks, 44in tires, 500HP 383 stroker motor, 700R4 trans mated to a 205 twin sticked, single triangulated four link with FOA 18in coilovers. I'll try to keep this updated, here are a few pics to start. :redneck:

looks good marshall cant wwait to see it done

 

[mjp1080]

I've been pretty busy working on this thing over the last few days, and its finally starting to look like something. A couple of friends came over last night and we worked on this thing til 5 AM! We got 90 percent of the structure tacked together. I still have a ton of finish welding to do, and a bunch of cross bars and straight pieces to cut and install but you guys can see the basic idea of what it will look like anyway.:D

 

[charliesnyder]

Wow.. Things came together quick on this! Looks *****en!

 

[skinny_pedal]

It looks pissed. Me likey:cool:

 

[Cole1]

Thing went together fast I like the design alot.

 

[mjp1080]

Today we got the rear section of the chassis all closed in and most of the structure welded. Plus I moved the upper spreader a up little and added the necesary supports for it. Still have about fourty feet of straight tubes and gussets to install, hopefully will get the motor trans and tcase mocked up this week.

 

[hwcurtice]

Just curious, other than keeping the tires from getting flat spots, what is the Dakota up for?

 

[mjp1080]

Its my buddys rig, rear brakes went ****house on it. Needs new calipers, rotors and pads.

 

[k2blazen]

lookin good

I like the us general air plain hanger type garage keep it up :awesomework:

 

[pos97TJ]

Is this going to be a single seater? How wide is it at the top of the roof? Looks good :awesomework:

 

[mjp1080]

It is going to be a two seater with no extra room inside. The roof is 30 inches wide and the widest point on the chassis is 47 inches.

 

[blackcj71]

fawking A right marshall! Looks :cool: Shop is *****en too

 

[JOOP]

Lookin good :awesomework:

 

[mjp1080]

This is just a few teaser pics, but at least it shows a little of what the stance will look like. The sittling like this the buggy should have a belly clearance of 23 in and a 76 in roof height. I still have to narrow the axles another 7 inches and do.......... everything else!

 

[JoshC1]

lookin good dude maybe when our rigs are done we can run some trails

 

[Bunk1]

Rubbin elbows!!!

 

[Mog9buG]

Your gonna narrow the rocks?! Good deal, I think its a must do. I narrowed 2 steers more recently. You should mohawk the bottom of the pumpkin while your at it! :awesomework: