:haha: :haha: Morgan I was building stairs while you were still mowing lawns :fawkdancesmiley:
RE-ntal
- Thread starter TB-F
- Start date
:haha: :haha: Morgan I was building stairs while you were still mowing lawns :fawkdancesmiley:
rustytrombone
Well-Known Member
just like the herpes BURN!:haha: 
jeffs88toy
Well-Known Member
just like the herpes BURN!:haha:
:wtf: stop:sommer:
rustytrombone
Well-Known Member
your just pisted that we stole your land GET OVER IT! you have a casino and a large check
jeffs88toy
Well-Known Member
:kissmyass: :haha: :haha: :haha:
DEANS4.3TOYO
Well-Known Member
- Joined
- Jan 17, 2007
- Messages
- 110
those stair look pretty hard to biuld and they look good.:awesomework:
Awlright clowns enuf bs'ing and back to the iregularly scheduled build because it's time for...
Suspension! :cheer: and by :cheer: I mean howly fawk what a lot of custom brackety work.
Did we even do anything on Friday Jason? or did we just drink beer? :beer:
So saturday I started out by buying myself a new toy because the thought of flame cutting all those pieces was way less than apealing so I hit up Central for..
A new plasma
Then I went about centering up the rear axle (look ma' real jackstands!:haha: ) We are shooting for the same wheelbase as we had before wich was 107" and it looks like we'r gona pul it off.
Axle alignment with plumbobs
And then skip forward a whole crapload of work because I didnt document it and here's the 90% finished product.
The upper links are 31" long and made out of 1 1/2 .188 wall DOM The lowers are 37" long and made out of 1 5/8 .250 wall DOM The spread between the uppers and lowers at the axle is 7 1/2" and at the chasis the vertical spread is 3". The uppers sit at 1deg +- sloping rearwards. Initial articulation shows very little rear steer and no binding :awesomework:
Side profile
Twisted untill the floor got in the way.
Here's where the lowers conect to the subframe
And the semi-completed towres for the uppers with some extra holes for ajustment if it dosnt work the way I hope.
Thats all for now, next it's mounting the rear air shocks and then on to the front :cheer:
Suspension! :cheer: and by :cheer: I mean howly fawk what a lot of custom brackety work.
Did we even do anything on Friday Jason? or did we just drink beer? :beer:
So saturday I started out by buying myself a new toy because the thought of flame cutting all those pieces was way less than apealing so I hit up Central for..
A new plasma
Then I went about centering up the rear axle (look ma' real jackstands!:haha: ) We are shooting for the same wheelbase as we had before wich was 107" and it looks like we'r gona pul it off.
Axle alignment with plumbobs
And then skip forward a whole crapload of work because I didnt document it and here's the 90% finished product.
The upper links are 31" long and made out of 1 1/2 .188 wall DOM The lowers are 37" long and made out of 1 5/8 .250 wall DOM The spread between the uppers and lowers at the axle is 7 1/2" and at the chasis the vertical spread is 3". The uppers sit at 1deg +- sloping rearwards. Initial articulation shows very little rear steer and no binding :awesomework:
Side profile
Twisted untill the floor got in the way.
Here's where the lowers conect to the subframe
And the semi-completed towres for the uppers with some extra holes for ajustment if it dosnt work the way I hope.
Thats all for now, next it's mounting the rear air shocks and then on to the front :cheer:
rustytrombone
Well-Known Member
Did we even do anything on Friday Jason? or did we just drink beer?
we drank the beeeers!! went down to the pastime and you whoped that preppy *****es ass at pool. nice!!!!
:awesomework:
we drank the beeeers!! went down to the pastime and you whoped that preppy *****es ass at pool. nice!!!!
:awesomework:
Oh yeah :haha: :haha: :haha:
War-Jeeper
Mailbox Killing War-Ho
Ive got the same plasma its fawking awesome!
TTF Fabrication
Well-Known Member
i also have the same one but now im pissed..... because yours is gold:fawkdancesmiley:
That's because mine's the "50,000 units sold" aniversary model. So it's gold and came with the fine cut tip kit.
London Gentleman
Well-Known Member
Nice new toy! I bet I could beat you at pool... :hi:
HOW MANY TIMES DID YOU HAVE TO MEASURE AND REDO:awesomework:
War-Jeeper
Mailbox Killing War-Ho
Lucky, mine isnt gold either, i feel slitely less special now:booo:
none, I never had a problem when I handled eveything myself, now I have to go by other people's mistakes, and fix them, sucks.
anytime you want to play who's the best fabricator between you and I, just bring it. I don't think you can pack that big of game, I have seen your work :fawkdancesmiley::haha: :haha:
Last edited:
jeffs88toy
Well-Known Member
none, I never had a problem when I handled eveything myself, now I have to go by other people's mistakes, and fix them, sucks.
anytime you want to play who's the best fabricator between you and I, just bring it. I don't think you can pack that big of game, I have seen your work :fawkdancesmiley::haha: :haha:
:corn: :stirpot:
jeffs88toy
Well-Known Member
:haha: no way
London Gentleman
Well-Known Member
Whenever you want to play man....
