Late night fab

Here is goes. The truck last time out had a little difficulty with a couple things and so I pulled it into the shop to think about what I was going to do. The main goal was to lower the truck a couple of inches. Seams easy. Well not really, So after many hours of sitting there going over different ideas and the plusses and minuses of the idea. I went for it. First was the frame tubes. I use to have a tube welded to the bottom of the frame
View attachment 30585
Then the drive lines were almost bottomed out so I built a new transfer case cross member and ended up with almost flat across the bottom of the frame 1.5 inches drop off the bottom of the frame
View attachment 30586
Then the front axle, I moved it forward 1

Strong work man! A little lower is a good plan. Truck is looking good :awesomework:

Right on Charlie :awesomework:

Those the wheels & tires I sold you awhile back??

slednecks1124 said:

Those the wheels & tires I sold you awhile back??

Click to expand...

Umm ya I think. Did we meet in North bend

nice work.:awesomework:

Shifters are in and the wiring cleaned up on the inside
View attachment 30599

DIY bead locks installed
View attachment 32559

View attachment 32560

View attachment 32561

were did you order the bead locks from ?

85b2man said:

were did you order the bead locks from ?

Click to expand...

Rhino on the board here
It is a great product. They come in 2 halfs that you have to weld together to make the full ring, But that is easy. They are really nice product, 1/4" inner and 5/16 outer

I'm back

Parts arriving daily, I am so pumped

r u goin going be out at reiter this weekend? Lets go run a couple trails together! If i see ya i will flag ya down! good work bud!:awesomework:

Yep I have some people comming by to pick up some stuff and then I am going to come down and run for a couple of hours

View attachment 35279

Off to the shop I go

nowires said:

View attachment 35279

Off to the shop I go

Click to expand...

SICK charlie those things are gonna FLEXXX lol :awesomework:

Yeha i was the one who met you in north bend with my buddy.

Truck is lookin good man! :awesomework:

So I finally took the trek to see my truck

View attachment 36157

I think it is going to end up with a 110 wheel base
19 to 20" belly
70" over all height

Just wanted to give ya a little sneek peek

Very cool Charlie! I just got my truck put back together, looking forward to seeing you out on the trail. Looks like yours should be alot more capable after this latest incarnation. Was cool before, now your

nowires said:

Rhino on the board here
It is a great product. They come in 2 halfs that you have to weld together to make the full ring, But that is easy. They are really nice product, 1/4" inner and 5/16 outer

Click to expand...

Nice to see a picture of the finished product.

Glad they worked out for ya.

Hopefully I will get up there to wheel with ya one of these days. :beer:

Darby said:

Very cool Charlie! I just got my truck put back together, looking forward to seeing you out on the trail. Looks like yours should be alot more capable after this latest incarnation. Was cool before, now your

Click to expand...

I can't wait to see it next week and bring my camera to get more pics. Darius work is just pure art.