Baby blu beater

pos97TJ said:

If it sticks together its weldable right:eeek::haha: Nice lookin bang for your buck build brad:awesomework:

Click to expand...

I even put the serial number stamped in ^up^ to see if you guys would catch that.:kissmyass: It makes me feel good to see you guys look so close at my ghetto fab.:haha:

It helped it fit on the diff allot better. :awesomework:

Its ok its a DOM handrail corner.:beer:

Ya know, if baby blue got wheeled really hard that ram gaurd could bend and rip off leaving a hole in the face of the diff. The face of the diff is so thin to begin with it is a good idea to weld down some plate first. Weldable cornersuke: They may be seemless but they are cast.

Mog9buG said:

Ya know, if baby blue got wheeled really hard that ram gaurd could bend and rip off leaving a hole in the face of the diff. The face of the diff is so thin to begin with it is a good idea to weld down some plate first. Weldable cornersuke: They may be seemless but they are cast.

Click to expand...

Do you have a "how to" book I can order? :looser:

I welded that ram guard on for FREE. If they dont like it I can CUT it OFF for
FREE too. I dont think you understand I dont build the best **** on the planet, I build **** that works killer for REAL cheap.:kissmyass::flipoff:

Would the ram be better off with the guard removed?:corn:

I dont think you (mog) wheel hard enough to damage it. Unless it gets a yank strap hooked to it its fine. (plus the owner has a welder and said he would plate it in making it a skidplate and more that strong).

Have fun building the best **** in the world, while you are these boys will be wheelin stuff that works "just fine".:beer:


Riddle me this mogboy, since when do weldable and cast go together?:corn:

so your excuse is you did it for free and the guy who owns the truck has a welder. thats retarded

kinda like spending all that time on the flexy front springs then throwing a block in the rear so it sits level.

do you ever look at the vehicle you modifying as a whole or do you just throw **** together and band aid it here and there?

you talk a good game but when someone points out the blatant flaws in your fabrication you get all defensive or resort to some cheap cop out.

One thing I will say is your welding is getting better if that is your welding

I'm not seeing any pics of these guys guys mad fabing skills.:looser: Looks good Brad.:awesomework: Good bang for the buck.

Boss7 said:

so your excuse is you did it for free and the guy who owns the truck has a welder. thats retarded

kinda like spending all that time on the flexy front springs then throwing a block in the rear so it sits level.

do you ever look at the vehicle you modifying as a whole or do you just throw **** together and band aid it here and there?

you talk a good game but when someone points out the blatant flaws in your fabrication you get all defensive or resort to some cheap cop out.

One thing I will say is your welding is getting better if that is your welding

Click to expand...

You make no valid point. As always:beer:

Mark m. said:

I'm not seeing any pics of these guys guys mad fabing skills.:looser: Looks good Brad.:awesomework: Good bang for the buck.

Click to expand...

Thanks Mark, some folks dont get it. Most of the same folks dont wheel either.:looser:

I dont know that rig almost looks useable. Weres the tig welds and powder coating?:fawkdancesmiley:

JAWS said:

I dont know that rig almost looks useable. Weres the tig welds and powder coating?:fawkdancesmiley:

Click to expand...

I spray painted it with 97cent walmart paint when it was still hot. Thats powdercoating roun here!:redneck:

Whats a tig weld? or did you mean big weld? Im cornfuseled:scratchhead:

chop shop said:

i spray painted it with 97cent walmart paint when it was still hot. Thats powdercoating roun here!:redneck:

Whats a tig weld? Or did you mean big weld? Im cornfuseled:scratchhead:

Click to expand...

lmao.

CHOP SHOP said:

I spray painted it with 97cent walmart paint when it was still hot. Thats powdercoating roun here!:redneck:

Whats a tig weld? or did you mean big weld? Im cornfuseled:scratchhead:

Click to expand...

lmfao:haha::redneck::flipoff:

CHOP SHOP said:

You make no valid point. As always:beer:

Click to expand...

Your right there is no point other than pointing out the obvious ****.

I was acually enjoying this thread until i seen you ****ed up on the rear spring setup and had to use a block.

Boss7 said:

I was acually enjoying this thread until i seen you ****ed up on the rear spring setup and had to use a block.

Click to expand...

How would you have fixed it without a block? I would love to hear it.:corn:



When your done Ill tell you why your point is, well worthless.:beer:

jprcrpr94 said:

You have no ****ing clue what you are talking about. Have you ever even wheeled?

Click to expand...

X2 Boss7 is a **** stain:looser:

This toy will work well after we weld up the rear diff and put in a 4.7-1 tcase.

Chop shop did a great job for the money he charged on this job.

Thanks B-Rad!!!:beer:

PS I'm glad you got to do this instead of me.......you did a better job then i would. it's not even close to a hack job and all done with out any trailgear or store baught parts.......beside's the shocks:awesomework:

Ed Bister said:

X2 Boss7 is a **** stain:looser:

This toy will work well after we weld up the rear diff and put in a 4.7-1 tcase.

Chop shop did a great job for the money he charged on this job.

Thanks B-Rad!!!:beer:

PS I'm glad you got to do this instead of me.......you did a better job then i would. it's not even close to a hack job and all done with out any trailgear or store baught parts.......beside's the shocks:awesomework:

Click to expand...

Brad cant build shocks... ???? :fawkdancesmiley:

This thing looks sweet, as soon as we get drivelines on it I'm sure Jeremy will be flexin up on the nearest rock or stump to test it out......I will take some pictures!:awesomework:

Ed Bister said:

This thing looks sweet, as soon as we get drivelines on it I'm sure Jeremy will be flexin up on the nearest rock or stump to test it out......I will take some pictures!:awesomework:

Click to expand...

It has drivelines ED. I just havent updated the pics yet.:beer:

CHOP SHOP said:

It has drivelines ED. I just havent updated the pics yet.:beer:

Click to expand...

I ment bolted up........still need to drill a few holes and get bolts from tacoma screw.

Thats what I ment:awesomework:

Well hurry up already then BRAD! This thing is giving me more ideas for my own first gen :fawkdancesmiley

Put the shocks on.:awesomework: