Project samurai repair and replace

Thinking this thing is gonna be 4 linked as I put it back together

That's how Gavin's went....see ya in a couple yrs! :fawkdancesmiley:
:redneck:

Haha I said might and it would be a little ways off gotta get my new place first

If I had a drawing for some plates to run my toy axles I would be on my way to leafs in no time

Are you taking out the stock axles and putting Toy axles in??

Poohbair said:

Are you taking out the stock axles and putting Toy axles in??

Click to expand...

Yup most likely don't want to cut them down till I got the yota plates and axles done

I am picking up a 91 with a bad rear end ... Need a replacement

I am also on my phone and I think I accidentally "reported" your prior post :awesomework::hi:

You don't want mine it's got a lunch box locker that broke so I ghetto welded it together and some how it has held for this long

Sandtrap1986 said:

You don't want mine it's got a lunch box locker that broke so I ghetto welded it together and some how it has held for this long

Click to expand...

I'm in no hurry I will gather a few parts at a time!!

Get r done--i wanna drag ya thru reiter :redneck:

zukkev said:

That's how Gavin's went....see ya in a couple yrs! :fawkdancesmiley:
:redneck:

Click to expand...

:flipoff:

crash said:

Get r done--i wanna drag ya thru reiter :redneck:

Click to expand...

Haha I'm trying for now I'm just gonna throw some yota axles under it and different leafs see how I feel about that and go from there

Sandtrap1986 said:

If I had a drawing for some plates to run my toy axles I would be on my way to leafs in no time

Click to expand...

:booo:
Actually looked for that photo, and It got lost with my last computer crash. Let me see if I can find it again on the 'net...

View attachment 57651View attachment 57652View attachment 57653

Blew the fuel Back and Dropped the tank today and replaced the inline filter both were full of chips and mud.

zukkev said:

:booo:
Actually looked for that photo, and It got lost with my last computer crash. Let me see if I can find it again on the 'net...

Click to expand...

I just text it to you! To lazy to upload!

View attachment 57655View attachment 57656
Finished buttoning up the cancers patch think I got the hang of this sheet metal work

View attachment 57657View attachment 57658

After I removed the stock broken seat noticed a rip so while I had the welder on and some extra metal figured I might as well fix the hole

View attachment 57659

Finally got the fold and tumble seat that I got from mark m ages ago in and tacked down the mount

Sandtrap1986 said:

If I had a drawing for some plates to run my toy axles I would be on my way to leafs in no time

Click to expand...

yj spring plate pdf

https://drive.google.com/file/d/0B0FPNWZMxOdDQVhUdkx4X0daT2s/view?usp=sharing

parts manual pdf
https://drive.google.com/file/d/0B0FPNWZMxOdDYnhUVWVoT2NJU0U/view?usp=sharing

haynes manual pdf
https://drive.google.com/file/d/0B0FPNWZMxOdDWEhvQ3VGWGsyZ3c/view?usp=sharing

factory manual pt 1/3
https://drive.google.com/file/d/0B0FPNWZMxOdDOFBnR21vczFHaTg/view?usp=sharing

factory pt 2/3
https://drive.google.com/file/d/0B0FPNWZMxOdDdXltX0tvd1p1NXc/view?usp=sharing

factory 3/3
https://drive.google.com/file/d/0B0FPNWZMxOdDVlZxUVpzSDJSZUU/view?usp=sharing

i also have a color wireing diagram for a 88 some where... ill share it when i find it.

View attachment 57693
Both seats in and tacked down and repainted mounts

View attachment 57694

Putting this in for the battery after I de rust it

View attachment 57695View attachment 57696View attachment 57697

Did some rust abatement on the new clip and on the kick panels