Search results for query: *

I’m buying a ranger that works fine 2013 but keep hearing all the bad about turf mode , my brothers 10’ model is banging already . I’d like to figure them out and the delete for them . Can they be welded like spider gears ? I see a Spook available for them .

Looking for one or a pair of rear axle shafts for an early 80s rear jeep wagoneer dana 44 that are 6 pug

I’m at the end of my rope with this thing . I’m still having the reverse issues with it . Originally the issue started where only in reverse the rev limiter ( I think ) kicks on around 2k rpms. It was driveable then. It’s progressed now and seems to come on as soon as you put I in reverse and...

I have a 94 Ranger 4x4 in great shape, it has the push button 4x4 and a 5 speed trans . I know nothing about the trans or case in the truck , is it 31 spline output and 6 bolt round pattern like the np205 and borg Warner cases ? I have some new parts I’m thinkin of redoing the shop truck . A...

17" rockwell beadlock wheels .

October 6-8 is my annual fall ride I host every year at Rausch . We wheel hard , chat and eat well one last time for the season as a large group. Anyone is welcome to join . If the group is huge we break up into smaller groups . Just a fun relaxing weekend . This year I ask that everyone brings...

Child booster seat insert like PRP made. The one that goes in an existing adult seat

This buggy was completed and debuted at the offroad expo this year, ive wheeled it and dialed it in throughout the summer. Its the best handling Rockwell buggy ive ever been in. I will continue to wheel it until or if it sells so the scratches will occur, its never been rolled yet. , I built...

Ive built several turn key rigs now and none of which were for myself so it was time to tear down jimmy smith number 1 and move into my own chassis. I wanted something outside the box and different but something that worked well on hills and rocks. This is what I came up with and I figured...

Lady Luck buggy has rockwells with rear steer that I home brewed , actually I reused the system I had in my Rockwelled wrangler. It has a log splitter valve with a power steering pump running it and for the most part it works great . Strong and fast. Problem I have is that it appears to only...

I've made em for ford 60 king pin knuckles but i don't see anyone really Doing it the the Chevy knuckles? Chevys are a tad heavier then the fords . I'm short on time and have a 14bolt just about done for a customer , it's a budget axle and I reused his lp60 for a donar , we discussed beefing his...

We have had several threads on here but no one had actually weighed them in, I got my hands on some scales and have a few axles laying around so I weighed them #1 debraked Rockwell steer axle with no shafts =600lbs #2 HP Dana 60 trussed 35 spline with no tie rod or drive flanges =500lbs #3...

Gonna start a new chassis for myself finally , useing my 383 and gonna make the jump over from propane to fuel Injection to pull a few extra ponies outta the motor and have a fuel cell that fits the chassis, I'm looking at Holley terminator , big stuff and msd automic, I have used the msd on a...

I've always ran 15" wheels with outer Rock rings and have never lost an inner bead, I'm thinkin of going with 17" stickies and lookin at wheel options, are any of you runnin 17s with only outer rock rings or do they need inners too? I know 16.5s need double beadlocks cuz there's no safety bead...

Started happening once in a while about a month ago and now it's happening a lot! I put it in reverse and it back fire and bang and pops and dogs out ... Runs great in neutral and both forward gears ... But as soon as you put it in reverse it's like a timing retard or ignition is breaking up ...

I currently have two very worn tsl's on the front of my buggy that have been vulcanized a few times , I put tractor supply tubes in them and they last awhile but where the biggest size tube they had and still seemed to small also the valve stem doesn't have a nut to hold it in the hole and the...

I have ran a rockwell rear steer for years , I have an electric over hydro pump and log splitter valve and it has worked fine, I built my wife a new buggy and put these axles in it and decided to go with a second power steering pump so it always has pressure and lightens the load on the charging...

I just bought a 2004 24 valve cummins and it has a smarty tuner on it now on the setting " 2" , I only ever to intend to run a small tune so that it doesn't tear the truck up , I also got a banks 6 gun with the truck that's never been on it, witch of these two is better and why? I have had a 12...

I have a Yamaha rhino I use for hunting and cutting wood, occasional trail riding but the I keep bending the beads on the wheels with stumps, logs and rocks ... Then they leak air... I've ran tubes but they kinda suck too with thorns...you can't plug em, a weld on set of beadlocks would be cheap...

My buddy is smokin ring and pinions in his lp60, he picked up a 14 bolt for 125$ and I'm gonna hack it up and use his 60 as a donar , the plan is 5:13 and his current yukon 35 splines ... Who makes a 35 spline spool or locker for a 14bolt and what seals can I use?