Search results for query: *

Was riding with a buggy this weekend that ended up on it's lid for a few minutes till we could flip it over. We pulled the plugs and cranked out the oil twice but the motor still ended up knocking. I knew there's gotta be a lot of experience between every body on this forum on how to handle...

Time to put some new brakes on my 04 2500HD. What's everyone running on their rig? Just something you pick up at the local parts store or is there some aftermarket stuff that's just so much better than OEM stuff that you will never run anything else? I never was too impressed with the brakes...

Working on my sister 2004 Chevy 1500. It had a weird grinding kind of noise that I swore was coming from the tcase. Took the tcase off and apart and found the rear snap ring holding the rear bearing on the main shaft was all chewed up and the bearing was shot. Put a new one on along with a new...

I never really thought I would be doing this but I just don't get to ride as much as I used to and it's a shame to see this I bought this rig completely stock 6-7 years ago and It's been a work in progress and been through several stages and I only get more and more impressed with it every...

I'm just riding along with a couple of buddies because my junk still isn't back together but it sounds like they decided to go to Harlan this Saturday. Anybody else gonna be there? Sent from my SM-G930T using Tapatalk

After blowing up my 241 housing earlier this year after beating on it pretty good for 5 years I decided to jump on a deal for a Ford 205 to replace. Started to think about it and wasn't sure I'd be happy with the gearing because when I swap it I figured I'd get rid of the 700r4 and put in a 400...

Been trying to sell these local and ain't had no luck. 39.5x13.5x17 Iroks. Bought them used myself and beat on them the past 5 years. Not much tread left but they seemed to do better on rocks the more they've worn down. One has been vulcanized in a few spots and they've all been kinda ate up...

Supposed to be a few of us coming down from Ohio. Looking for someone that can lead us around. We should get there after lunch on Friday and gonna leave Monday morning. Sent from my SM-G930T using Tapatalk

My 39s kind of rubbed my lower links at full lock and now the 43s get into them more. Was curious about running wheel spacers. I've read some good stuff and some bad stuff and a lot of its older stuff so I thought I'd start a newer discussion. I was asking a vendor about them this summer and I...

Been wanting to get a tune/ do a tune for my 8.1, dad has talked about tuning his 6.0 gasser and so has my buddy with a similar truck. Makes me think about looking into what it would take to get the EFI Live stuff and play with it myself. I like to think I got a halfway decent head on my...

Got an 04 8.1 allison and I had my old Diablosport tuner laying around that was on my 1/2 ton and then on my brothers F150. Worked good on both trucks but we took it off his truck one day to put on mine and see what it would do. It had 2 different tunes in it for my truck and I installed one and...

My front axle was leaking after I pulled it apart last time to check on the internals. Went and got new axle seals and just pulled it apart to find that the old ones actually looked fine just had some junk around them where they seal to the shaft. Clean it out as best I can and put it back...

Took my outer knuckle off to get it plated and kinda inspect everything. When I was taking it apart the lower bearing came out in pieces. Guessing it's original and older than I am. I ordered a lower rebuild kit that comes with bearing, race, and seal. Problem is I can't get the old race out...

I know there's a few people on here from Ohio so I thought I would share this. A couple years ago we lost a good wheeling buddy of ours to lung cancer. He was diagnosed at stage 4 around February and we lost him by June. He was only 31 years old and a non smoker so to lose him to lung cancer at...

Looking for stock inner shafts for my HP60. Located in Columbus Oh. I'll pay shipping.

My 4l60e went out and I'm going to go ahead and replace it with an 80. Looking for a transmission and if there's an electric shift tcase on the back that's cool too but I can do without it.

Had a small wobble on my balancer so I ordered a new one from JEGS. They said this was the one it called for and the crank pulley bolts up and the parts every thing else looks the same besides the fact the diameter is obviously different. Is this a problem? This is on a TBI 350 out of an 88 truck.

We were riding this weekend and I couldn't see a giant hole on my passenger side and it swallowed my jeep. We hit real hard and it shoved my crank pulley into my upper link mounts that we thought had plenty of clearance when we flexed it out. Anyways the crank pulley is trashed and I try and...

Where do I find the stock bolts that hold the H-bars on a 79 HP 60. My calipers fell off 3 times this weekend and drove me nuts. I always thought I was just supposed to put a 5/16 bolt in and smash it in place but then I heard there is a special shoulder bolt that holds it but I don't know...

About to take my Juggy out on its first ride this weekend if I can get it finished up this week. One of the major things I have left is the exhaust. It's been one of the biggest thorns in my side because I always smashed the crossover pipes before and it lead to overheating issues. As it sits...