Search results for query: *

What's eveyone using to protect their eyes? Just got some metal removed and I was wearing a full face sheild. Figure somebody's got something better.

Took my 72 bronco out for drive after sitting for a while. Drove and ran fine then when I put into 1st and it won't come out? Tried popping the clutch, feathering it everything to change the load and no dice. Any ideas before I pull eveything out to take it apart?

I have a 2000 watt generator from Costco with a Yamaha motor. Started it a couple of weeks ago and everything was fine. Now the dam thing won't start. Dumped the gas and started with fresh gas, but nothing. Checked to make sure that I'm getting gas at the carb, have spark, but still nothing...

So for the 4th time since I've owned my truck I was broken into using the old screwdriver in the lock method. :mad: I did the Jimmie Jammers after the first break in and well that was a nice try, but didn't stop them. I don't have an alarm and not sure that would help since the truck sits in...

Wife's 2002 ford escape started making noise yesterday when turning the steering wheel. Checked fluid and its full. Noise only happens when turning from a stopped position and doesn't seem to do it at speed. the noise seems to be coming from the lower in the car and not at the pump. Tried...

Is there anyway to recover the coolant from the AC system at home? I need to remove the condenser to install my oil cooler on my truck. Or do I just crack open the fittings and let it drain itself and clean up the mess?

Anybody know where to pick up a machinists straight edge in the south sound? Want to make sure the heads and block are good before putting my motor back together. TIA

My superduty started smoking the other day? Black smoke at idle and when I take off it produces a nioce sized cloud that is party tan/steam looking? It happend a couple of time to mee and doesn't happen on startup, but instead it happens about 1/2 up on the temp gauge and then seems to stop once...

Had my Axial crawler out this weekend and after a couple of minutes of just playing around it started smoking? I immediately took it into the garage and one of the wires to the motor was hot. It now won

Is there something that is better than carb cleaner at cleaning the residue left from old gas? Motorcylce carb had gas sitting in it for a year and the bowl is full of crude and buildup. Carb cleaner somewhat removed it, but not all of it even with a brush. Ideas?

Where is a cheap place to get my forklift tanks filled in Tacoma? I used to go to Star Ice and Fuel, but they're now closed. Thanks

I

Any idea on where I can get my trailer weighed with Bronco on it in the Tacoma area? Need to figure out how heavy it is to see if my Torklift extension is ok. Thanks

So the battery on my sons ttr5o died. So I run to the local shop and they want $70 for a new one. So anybody have a better place to buy than the dealer?

Does anybody know if I have to get my 2002 diesel emmission tested? According to the flunky at the liscense place I do, but thought diesels didn't have to? I looked on the pierce county and the state sites and couldn't find any info. I'd like to know before wasting a drive to Fife to stand in...

Trying to get ready to tow the trailer with the new camper and need help with the wiring. Is there a cheap splitter to feed the camper and trailer? Can I just make one? Thanks

I remember seeing a thread a while back tthat they were going to be closing the Little Naches till Juneish for wheeling and was wondering if this started this year? Is it just this area or others too?

What's the cuurent rate for 1.75" x .120 wall tubing per foot in the Tacoma/ South sound area? I was quoted $4.99 for DOM and $3.25 for HREW.

I've got my propane setup hooked up and it won't start and I think it's possibly the vacuum hose aren't right? It's a 450 OHG mixer and a Model E vaporizer with an electric lockout. I know it's getting propane past the lockout, but it just doesn't seem to want to fire at all. Do I need the "BAL"...

I bought a propane setup with a Model E vaporizer and a 300A mixer. On the vaporizer there are 2 separate plastic pieces. Each of these pieces has 2 electrical spade connectors on one end and what appears to be a vacuum port on the other end with a pipe thread in the middle on the side? What are...