Search results for query: *

I just found a crack in my exhaust where the pipe exits my Cat. Looks like the weld cracked. There is not any pipe between the crack and the cat. Any ideas as to weather or not this could be welded? I'l get a pic up later (the wife took the camera :mad:) Thanks!!

Be kind this is my first attempt at building anything out of steel. Does this look like enough bolts? This is a piece of 3x5

I

Had that annoying squeaking belt. Just put on a new one last weekend. While I had the belt off I spun each of the pulleys and they moved freely. Drove it Sunday for 100+ miles no squeak no problems. Tuesday it starts squeaking again. Only the sound is different. Less rubber squeal and more...

[FONT=Arial]Help! I

Drained flushed (kind of) and filled my radiator. ran out of room before I had the book prescribed 9qts in. I have a coolant to h2o ratio of 3 to 1. So I ran it for a 2-5 minutes w/o the radiator cap on to see if there was some trapped air. No change. I closed the radiator and let it sit...

My 95 YJ 4 banger sounds like a noisy diesel. It's also burning about a quart of oil every 300-500 miles.:eek: I had found an article on replacing the valves/lifters a while back that seemed likely fix. Now that I have some extra $ I can't find the article:mad::mad::mad:. Any body have a...

My last trip out wheelin made it painfully clear the my poor old stock 95 YJ with a 2.5l and a hard top needs help. If I'm going to wheel it I've got to build it better. Seems like a good place to start is with suspension. I've been reading tons about lifts. I know a SOA would probably give...

Went on the Reiter Noob run yesterday and had a blast. Thanks Karl:awesomework::awesomework:!! Unfortunately one of the rock ledges on Isabelle ate my belly pan:mad::mad:. It's is dented so much that my rear t-case yoke bangs on the tub when I start from a stop or hit a bump. Is it worth...

I've got an error code for a bad O2 sensor. Went to parts store. The one they gave me is heated (and a lot bigger around). The manual says that 87-90 have heated sensors. It does not specify which kind are used in a 95:mad:. Does any one know if the 95s need a heated sensor or not? What...

After my first real wheelin trip after the cleanup I discovered just how weak jeep rocker panels are.:haha::haha: I'm going to try and build my own armor. Kind of like these http://www.bc4x4.com/pv/yj/rockers/default.cfm Please forgive the basic questions I'm a noob. I'm thinking of using...

Thanks SpidetToy Nick, & Eric, I had a BLAST!!! Thanks for taking me up to the wall after the cleanup. That was fawking FUN!!! :cheer: Looks like I'll be building some rocker armor:haha::haha:. Enjoyed meeting a lot of others as well. Please forgive me if I can't remember all the names...

I'm just learning to do the work on my jeep wrangler. I want to pick up a torque wrench. Which one should I get: Click or beam? Range? 20-250lbs 3/8th drive seems to cover most specs for my jeep, but some specs are in inch pounds. Can't find one that does both :mad:. First task is t-case...

I've got Monday off this week. So I was thinking about heading out to Reiter. Rig is stock YJ no winch. Which, if any trails would be safe for me to play on? I was planning on 10:30 or 11 ish. Just want to bump around a bit with the family. I have no experience. Like to go with someone...

:looser: I know this is lame, but I don't have the place, the skills, or the tools to pull these off. :redface:(basic tools only) I have a 95 YJ that has leaky t-case seals (front seal is good) needs rear pinion seals, and the spedo sensor leaks.:booo: I either need a recommendation for a...

I'm New (translated means ignorant) I need new tires. I like what I've read on the BFGs. Discount tire has both the AT and MT for the same price (30x950x15). My rig (daily driver) is a bone stock 95 YJ. I want to start playing in the dirt on weekends with the family. I'm worried the ATs...