Search results for query: *

No it does not

How much is this worth...a used 9" hi pinion currie 3rd member with Detroit locker and 4:56 gears and I think it's 35 spline.thanks

OK thanks everyone...the guy that welded it is a certified welder (thats what i was told)and is a black smith by trade.and another question should I install a anti coneing ring ?if so any pics of anyone that has made there own.thanks

I bought some beadlocks rims that the guy welded the inner beadlock rings on and he tested and no leaks.but his welds are uneven higher in spots should I grind them down or will the bead be OK how it is.or should I mount them and if no Leaks go with it.thanks

Thanks not sure whats its out of i have a buddy that works at Pheonix rack & axle.he said he had a Dana 50 laying around.if it the super duty then i would have to run 16" or bigger rims and I'm trieing to stay 15"rim for now since i just got tires.and Brad said i can find 8 lug 15"rim sounds...

I can pick up a dana 50 for a good price will it hold up to 38"swampers or would i have to upgrade any of it.or install and wheel it.or just save and buy a Dana 60.

yes i really need lower gears and i already have chromolly yukon shafts and yuokon duoer joints. And another question for you all what would be the best dana 60 to go with and do any come stick with lower gears.and what is the easiest hi steer i need for being soa.thanks

It was a lot beer front wheel drive only and a lot of rpms..but it did brake and they did warranty them.so i guess for now brake and return for warranty.

I was breaking chromolly shafts with 33"s.would it cost effective if i went to a dana 44 up front or just go to a dana 60 but then i would have to go bigger rims with a 60 so then i would need different tires for rim size.and if i did a 44 witch one is better wagoneer ford dodge and could i get...

Sorry the axles are rear 8.8 out of a newer explorer with yukon alloy shafts and front is a dana 30 with yukon chromolly shafts and yukon super joints.if that makes a difference.and i have factory 410 gears.

I just put on some 38x12.50/15 TSL's on my jeep wrangler yj.im locked up front powertrax and mini spool in rear.i was woundering if i went to big and if it going to brake my axles.if they are to big what would be a good size intell im able to upgrade to one ton axles.im in Arizona so rocks if i...

Why are you using low pinion and not a high pinion dana 30

Thank you.i canned that fan it probably would have worked but i just went and bought a taurus fan that i know will work.

Its a hall effect something else setting off that sensor code.my 91 set off cps code and it was the distributor.run some seafoam and go from there.good luck you will figure it out.

I got this fan from a friend and was told it is a taurus fan but i dont think it is.it fits REALLY nice on the radiator and in my 1991 4.0 yj.it has 3 wires comming out 1 black and 2 blue.when i hook power to each blue it runs same speed but when i hook up both blue wires it runs fast like hi...

Some one told me that you dont want to because they move seperate.but i dont like the plate bolted to just the floor on the front bars that i added.A good roll and it could go threw the floor.so i want to plate the othe side and come off the frame.and tie into the frame on some more spots.i...

I was woundering if i can tie the cage into the frame.i know the tub has rubber bushing between the frame and tub so they move separate. But i want to make the cage and jeep as strong as possible.this is on my 1991 yj.thanks

I have a 1991 jeep wrangler and put a good working ax15 in it about 6 months ago put in new clutch at same time.worked great then about a month later slave cylinder started leaking so put a new one in.it worked OK for a short time now some times it works great.and other times it is a bitch to...

My cherokee does the same thing I just open the hood and shake throttle cable and kick down that usealy works .But last time It would not kick down so I tapped the on the sensor thats onthe firewall right above the intake and it worked so I think that is the problem.good luck..

I had a long drawn out spark problem.It was the pick up inside of the distributer.I have alot of spare eletrical stuff we can plug and play im off saturday and local if you want a hand maybe we can figure it out.