Ian Chilcote
Active Member
- Joined
- Jan 17, 2016
- Messages
- 28
Current set up is RCI tank with top outlet to pick up split inside the tank
Problem- acts like maybe sucking air on incline periodically
It has a return also on top. Pump is Jegs online about 5' from tank on frame rail. It is 43psi which so in told is accurate with Toyota required pressure.
Should I try putting supply on bottom of tank to seee if it solves the problem or bite the bullet and just convert to propane? I'm assuming this is the problem but maybe looking looking at it from the wrong angle? Only happens on an incline
Thanks in advance for everyone's advise!
Problem- acts like maybe sucking air on incline periodically
It has a return also on top. Pump is Jegs online about 5' from tank on frame rail. It is 43psi which so in told is accurate with Toyota required pressure.
Should I try putting supply on bottom of tank to seee if it solves the problem or bite the bullet and just convert to propane? I'm assuming this is the problem but maybe looking looking at it from the wrong angle? Only happens on an incline
Thanks in advance for everyone's advise!