Noice, berry noice. Doing some good mods man. The fenders look great and the driveshaft ought to hold up to 10 Boat Ramps. 
Hardline Custom "Sassy Chassis" P's buggy
- Thread starter P
- Start date
you gonna go ahead and add that wooooooo poooooow to your motor while you're at it? 
P
If its free, its P
Unfortunately that Howell setup would require alot more then I want to get into so its going ( went ) into my dads Willy's... we are trying to ressurect that thing from the dead , and quickly before Amber kills me for it sitting in the driveway to long. :****:
Im going to redo the exhaust eventually now that I have more space with the 1pc front driveline on the passenger side, and I am putting the bling bling fuel pump in it as well. I just need to get it running to its fullest potential for now. Im going to keep riding it as often as possible and tweaking all the little things that I can during the week so I dont miss anything.
I also brought the tag back from the Turd, so the buggy will be tagged and insured soon as well ! Those Cadillac tail lights are going to look badass on the back of a buggy ! :****:
Im going to redo the exhaust eventually now that I have more space with the 1pc front driveline on the passenger side, and I am putting the bling bling fuel pump in it as well. I just need to get it running to its fullest potential for now. Im going to keep riding it as often as possible and tweaking all the little things that I can during the week so I dont miss anything.
I also brought the tag back from the Turd, so the buggy will be tagged and insured soon as well ! Those Cadillac tail lights are going to look badass on the back of a buggy ! :****:
That sucks on the motor, was hoping you could breathe some new life in it. Any plans to tune it any? Seemed like it has some issues last time I heard you lay in it at WITC, but it might of been running out of gas 
P
If its free, its P
I have a few small things causing me problem's , yes Im working on all that as well.. exhaust is some of it, I think fuel is some of it ( hence the bling fuel pump that came with all the wooom pow parts from Greg going on mine ) Keeping it in its temp range has been an issue as well so Im workig on that too.
Tonight I took the front end apart were I had a sloppy looking longfield joint on the short side, found some slight twist in my Yukon outter and the joint was actually in better shape then I suspected so hell, I have a spare Long joint to keep around now. I replaced the bearings and wheel seal while it was apart as well.
It still had Summertown in it 
been weeeeeeeeeeet around here since the first of 09
Oh yea, went ahead and snapped my dash in its current arrangement...
Tonight I took the front end apart were I had a sloppy looking longfield joint on the short side, found some slight twist in my Yukon outter and the joint was actually in better shape then I suspected so hell, I have a spare Long joint to keep around now. I replaced the bearings and wheel seal while it was apart as well.
It still had Summertown in it been weeeeeeeeeeet around here since the first of 09 Oh yea, went ahead and snapped my dash in its current arrangement...
P said:I have a few small things causing me problem's , yes Im working on all that as well.. exhaust is some of it, I think fuel is some of it ( hence the bling fuel pump that came with all the wooom pow parts from Greg going on mine ) Keeping it in its temp range has been an issue as well so Im workig on that too.
Tonight I took the front end apart were I had a sloppy looking longfield joint on the short side, found some slight twist in my Yukon outter and the joint was actually in better shape then I suspected so hell, I have a spare Long joint to keep around now. I replaced the bearings and wheel seal while it was apart as well.
What twist? huh, I don't see it.
Oh yea, went ahead and snapped my dash in its current arrangement...
Nice addition. Looks like you gonna be able to see behind you as well.
P
If its free, its P
SPOA87YJ said:
Different... well if you must know its aluminum pieces of scrap I have been watching for at work, hence the 2 different pieces and the weird shaped hole around the Tach !
If its free its P !!
Rescue1
When in doubt, the skinny pedal is on the right
If its free its P !!
[/quote]
Now thats what I'm talkin about.
[/quote]
Now thats what I'm talkin about.
P
If its free, its P
I just got a tag for the buggy !!!!!!!!!!!!!!!!! :****: 
Now I gotta put my taillights on ! laughing1
EDIT:
I found some 39 Ford taillights I think Im going to run instead of the Caddi lights. Be easier and smaller plus they are pretty dang cheap and have custom bezel's that I like, Fenders are painted for the front end and going on tonight. Wired the winch to a boat trim switch on the dash, very small and works great ( priced right too..FREE )
Now I gotta put my taillights on ! laughing1
EDIT:
I found some 39 Ford taillights I think Im going to run instead of the Caddi lights. Be easier and smaller plus they are pretty dang cheap and have custom bezel's that I like, Fenders are painted for the front end and going on tonight. Wired the winch to a boat trim switch on the dash, very small and works great ( priced right too..FREE )
P
If its free, its P
I didnt get any pics of it with the new fenders this weekend wheeling.... was to busy wheeling and only took a few pics of Woods ride on its lid. [attachment deleted by admin]
jtreeves1
why are you taking the time to read this retard
dats a long azzz trailor :****:
JFab
Well-Known Member
jtreeves1 said:
yea, no kiddin! i dig it though!
crawler1
Well-Known Member
Looks sweet , Nice and clean lines 
P
If its free, its P
I may cut the back's of the fenders were they overlap the door skin , I just wanted to get them on there and see how I felt about them first so I havent trimmed or cut anything on them at all, they are straight outta the box with shakey can paint on them laughing1
P
If its free, its P
New tires just landed. 42SX II's these things are freaking NASTY... cant wait to try them out !
W
wontwork
Guest
I like those alot.
P
If its free, its P
I havent put them on a scale yet, but I swear just the tire weighs as much as the ProComp and Beadlock laughing1
