Truck runner

[stompinjab1]

Ok here is a truck I've been working on. It came in for a used bummper and winch off another project. It's now getting new 5" TG V8 front spings ( I hope they settle) Full hydro steer, Half doors, The junk Allpoo cage removed along with the roof for a new cage , sliders, front and rear bumper ,rear seat , belts and fule cell Here are some before pics.

 

[stompinjab1]

This is what I have done so far

 

[stompinjab1]

And the cage

 

[Brian H]

Thats what my cage should have looked like. Nice work.

 

[stompinjab1]

Thats what my cage should have looked like. Nice work.

Thanks I don't want to throw salt in the wound but it probably cost less too

 

[dirtyhall]

Nice work!

 

[Brian H]

Thanks I don't want to throw salt in the wound but it probably cost less too

Thanks Jeff........ the salt hurts!!!!!:fawkdancesmiley: :haha:

 

[stompinjab1]

Sorry couln't help it:booo:

 

[TOPWOP]

I have the tg 5" hd springs I ended up taking two leafs out. then they settled about 2" and are hella soft. I like them and if they go flat i can throw in one of the leafs i pulled out.

 

[stompinjab1]

I have the tg 5" hd springs I ended up taking two leafs out. then they settled about 2" and are hella soft. I like them and if they go flat i can throw in one of the leafs i pulled out.

Do you have a V8 also? If so I just might do that befor it leaves

 

[TOPWOP]

no Its a 22re. but it was too tall. I took out the two leafs and then had to let it sit for about two months and in settled about 2" so now im thinking of puting one of the leafs back but its still kind top heavy. Its 29" to the cross member.