Search results for query: *

This is not my buggy just posting for a friend. Please contact Bubba Bacon at 423-402-1085 if interested or any question -LS 6.0 w/hot cam & springs -PTC TH350 -PTC converter -Atlas 3.8 32 spline outputs -1410 Driveshafts -Dana 60 Front, ARB air locker, 4.56, 4340 shafts, CTM u-joints...

This is not my buggy just posting for a friend. This is a real nice buggy for the money. It has not been on many rides and still looks new. No dented bars and hardly any scratches. I took this buggy in on trade and don't have much need in it. Everything works good. Located in Charleston, Tn...

Specs: '12 Jimmy Smith motor sports chassis 1.75x.188 wall Dom lower frame, 1.75x.120 wall Dom upper frame 460w sbf w/fast fuel system built by Precision Race Engines (Have all the paperwork with specs on engine build along with dyno sheets) C6 transmission w/ manuel valve body, Derale cooler...

All services and warranty work have been done by dealer here in maryville tn. Bike is in great condition has right at 1k miles. I have put tons of extras on it including custom cage, special carriers high clearance a arms, sway bar links, radius rods and trailing arms (all powder coated candy...

Built by Jimmy Smith in 2012. All upper part of cage is 1.75x.120 dom and lower subframe and back-half is 1.75x.188 dom. The back-half was redone by EOR. It does have some dented tubes on lower half but is still structurally safe. I am 6'1" 250lb and have plenty of room. Please only serious...

The shafts are in good condition as well as the u joints. I went to bigger u joints and no longer need these. One shaft is 33" fully collapsed and the other is 36". They are the 10 spline ag shaft material which is guaranteed not to twist!! $700 located in Knoxville Tn

18/44-17 Interco cut Boggers mounted on black racelines..only have two runs on them. Just looking to get my money back. $2900 located in maryville tn

Nothing wrong with any just went with a longer stroke cylinder and cbr pump. Ram does not have clevis or mounting bracket. Located right outside Knoxville Tn. Would like to sell as a whole but will separate. $500 for everything, thanks Jamie!! 2.75x8x1.75 DE ram. -6 fittings $350 80-newer...

I've been battling this problem for over a year now. I thought I had it figured out when I switched to the aluminum hub setup, but 4 months later they're starting to work their way loose again? I was having the same issue when I was using the stock hubs also. Ive tried every bolt, stud, oem...

Specs: '12 Jimmy Smith motor sports chassis 1.75x.188 wall Dom lower frame, 1.75x.120 wall Dom upper frame 460w sbf w/fast fuel system built by Precision Race Engines (Have all the paperwork with specs on engine build along with dyno sheets) C6 transmission w/ manuel valve body, Derale cooler...

Dana 60 35 spline locker for 4.56 and up carrier. Locker was in my dads buggy and worked fine when it was pulled. Ended up breaking a ring and pinion so when I replaced the r&p I just put a spool back in its place. $400 obo. Located right outside Knoxville Tn. If interested please pm for...

I have a set of front and rear Maxxis Bighorn tires with stock rzr 1000 wheels. Tires and wheels are brand new and have never been installed. Please no trades and I will not separate or sell individually. $800, located right outside of Knoxville, Tn. Thanks, Jamie...

Atlas 3.0:1 31 spline input ,drivers drop, all 300m internals, 1350 yokes, no speedo sensor. Going to keep shifters and trans adapter. Has about 10 rides since install back in January. Nothing wrong just going a different direction. Currently still installed in buggy and picture is the day it...

Like to have a later model (ribbed housing) srw housing relatively close to knoxville!! Thanks guys

Tires are about 85%-90% with about ten rides total run on them. One tire has been vulcanized do to a cut sidewall. Not really looking for trades and not willing to separate them. Located right outside Knoxville Tn. Asking $1500 obo.

Any help will be greatly appreciated!! I'm running fox 2.0 emulsion coilovers on my buggy, so here's my question /problem. The lower springs on my front 2 coilovers are bowing and rubbing the bearing caps. Ive noticed about every other ride i need to tighten the caps due to this. Also, on the...

Got a 14 bolt 5.13 ring gear and pinion plus a Detroit locker for sale. Nothing wrong with either, a buddy of mine just bought a complete front axle with a 5.38 gear so he decided to put the same back in the 14 bolt with a spool. Looking to get $350

Buggy was built 95% turnkey by jimmy in may of '12 and was completed in Aug '12 by me and my dad! Buggy has performed great each time i have taken it out and it has not left me stranded(knock on wood)!! I Don't need/have to sell the rig, i am just burnt out riding the same ol place every...

Atlas 2 speed 4.3:1.. Driver's drop, 31 spline input, 32 spline outputs, 1350 yokes, speedometer plug kit, no shifters..located just outside of knoxville tn...$1800 obo

Like the title says who has the best price on some tube? Looking for 100'-1.75x.188 wall and 200'-1.75x.120 wall