Search results for query: *

my alternator keeps frying in my buggy. its a stock 4.3 si with an internal regulator. i have the charge post going strait to the battery. the ground is grounded to the chassis, i have the red wire from the plug spliced in to the charge wire that goes to my battery. and the brown wire from the...

breaks on my buggy not holding in low range. i saw the posts on that build up that clark put up. i have cnc pedals with 1 1/16th bore and a 14in pedal. i adjusted it so the pedal pushed in more and that didnt help. do i need a longer pedal for a better ratio or could the bore be to big? it holds...

i started by bleeding the rear and it went very well no problems. i went to the front and am not able to get them bleed. i used a vacuum bleeder to start them then the usual pump and bleed so forth. i pump and pump and the front calipers are tight then they loosen up amedeatly. i tore the master...

k im finishing my buddies buggy for him and its been a head ache to say the least. i havent done any reserch yet but i was hoping someone would know off the top of there head if a 1988 22re uses the same clutch as a 83. the tranny is an 83. i bleed it, the clutch fork moves all the way, it...

do they have an internal regulator? and what is the 12 volt reference? its on a 88 22re with an ORS harness.

so before i go spend 80each on new injectors i was wondering. are they shot forshur when fuel drips out and not sprays? its an 88-92 tbi 4.3. i went thru and cleaned the whole tbi unit. it was pritty nasty.:puke:

i have 12 volts going to my coil and its my second coil thats smoked. after having my key on for about 2 minutes it starts smoking. does anyone have any idea on why the f k its doing this.:mad:

I need my 60 front narrowed to 61 1/2 inches and my 70 rear to 60 inches if any one can do it or hook me up with someone that can do it let me know. thanks,

I have a toy front that im going to do full hydro on it. i was wondering what size ram i should use. ive been told to use the 8in ram then ive been told to use the 6in ram, the 6in ram sounds good but i am looking to confim it.