Hardline Custom "Sassy Chassis" P's buggy

John Galbreath Jr. · Feb 25, 2008

P said:
Thats awesome, will John G's work ? laughing1

( I was gonna buy the E whateva since I know those work.... )

Holley site says not for use on fuel injection!

http://www.holley.com/data/Products/Technical/Fuel%20Pump%20Tech%20Info.pdf

This is what I use on both of mine.

http://motors.search.ebay.com/?from=R40&satitle=GSL392+Walbro+

Hardline4 · Feb 25, 2008

I've got a pump with less than ten minutes on it. Cant remember the part number but it came from Oreillys. It's for a TBI motor I bought it and can't use it since I now have a Vortec. I paid in the ~$70 range it's yours for $20 if you want it...

1TONZR2 · Feb 25, 2008

I am running the E2000 pump on my rig and it works pretty damn good....you can find them on ebay pretty cheap as well.

Brian

race_jeep · Feb 25, 2008

The holley blue would not run my tbi motor it would idle but would die when you gave it gas I had to switch to the e2000

blacksheep10 · Feb 25, 2008

P said:
Thats awesome, will John G's work ? laughing1

( I was gonna buy the E whateva since I know those work.... )

no holley blue. black maybe. easier to go with the walbro. if hardline's is the right one, buy it. problem I had was the cheap ones burning up quicker.

P · Feb 26, 2008

Hardline4 said:
I've got a pump with less than ten minutes on it. Cant remember the part number but it came from Oreillys. It's for a TBI motor I bought it and can't use it since I now have a Vortec. I paid in the ~$70 range it's yours for $20 if you want it...

Heck yes I do man... PM sent

Ima stupid head, I took pics of the rig last night but somehow messed up getting them on my lil 2gig external

under_psi · Feb 26, 2008

how bout those updated pics, as promised?

P · Feb 27, 2008

This is from Sunday.... the front end is torn down and Im doing the steering and finishing up the axle truss so these are already out dated laughing1

Bones · Feb 27, 2008

you stole that stinger from Timmy. molaugh

P · Feb 27, 2008

Wyatt and other aluminum users... You think I can tab and just "finesse" the roof into place or do I need to do something different to get it to contour the front windshield eyebrow...

( you can see it just layin on the top in these pics..... )

K thx Bye :flipoff1:

tonka toy · Feb 27, 2008

it's getting close keep up the good work

Hardline4 · Feb 27, 2008

You really need to do your top in break. Take it back to whoever did your tunnel and tell him what you need. It will have a much better look to it and if you ever have to take it off it will be much easier gettin it back on.

Woodlee · Feb 27, 2008

What thickness Aluminum are you using? I may can help

P · Feb 28, 2008

Ill have to look and see... it was "scrap" from work laughing1

P · Feb 28, 2008

When Im done with it. :flipoff1:

Hardline04 has sold me a fuel pump, Im in the middle of finishing up stuuring and Miles is bringing a bunch of driveline stuff from Kelly on the front driveshaft today. Plumb and wire, fire disassemble paint re attach and go. Who knows when Ill actually get it done, My daughter and personal live consume alot of my time and thats priority 1 .

Ill be there in April no worries.

6uldv8 · Feb 28, 2008

Plumb and wire, fire disassemble paint re attach and go.

fire? what's that do? stress relieve the chassis welds or something? molaugh

wontwork · Feb 28, 2008

Break the front down and trim it to fit your bars. This would keep your top flat, but you need to roll some beads in it so it will be rigid.
Call if you need some help bending or cutting that aluminum can handle it no problem.

P · Feb 28, 2008

wontwork said:
Break the front down and trim it to fit your bars. This would keep your top flat, but you need to roll some beads in it so it will be rigid.
Call if you need some help bending or cutting that aluminum can handle it no problem.

When can I bribe you over for a consultation ? :dunno:

I was going to "cut" the front edge of the alum to a "v" that matched the eyebrow and tab off the brow and other roof bars and attach it to said tabs, only concern was bending the alum at the front edge to come down and meet the brow.

wontwork · Feb 28, 2008

When can I bribe you over for a consultation ? :dunno:

I was going to "cut" the front edge of the alum to a "v" that matched the eyebrow and tab off the brow and other roof bars and attach it to said tabs, only concern was bending the alum at the front edge to come down and meet the brow.
[/quote]

Tonight, Friday night, Saturday morning before lunch, Saturday afternoon after 2:00, Sunday after 1:00.

P · Feb 28, 2008

wontwork said:
When can I bribe you over for a consultation ? I was going to "cut" the front edge of the alum to a "v" that matched the eyebrow and tab off the brow and other roof bars and attach it to said tabs, only concern was bending the alum at the front edge to come down and meet the brow.

Tonight, Friday night, Saturday morning before lunch, Saturday afternoon after 2:00, Sunday after 1:00.

Can you be at the shop tonight around 5 -5:30 ? If you got time we may have a lil fun too on the fittys