-
Help Support Hardline Crawlers :
J
Joc
Guest
Re: Re: Mash yer motor - Csc fab buggy
JohnG said:
J
Joc
Guest
Re: Re: Mash yer motor - Csc fab buggy
poolman said:You would know right?
kmcminn
Well-Known Member
Re: Mash yer motor - Csc fab buggy
Where did your axle shafts go.
Where did your axle shafts go.
kushKrawlin
Well-Known Member
Re:
Guess who don't need it bitches. You. Hahaha weld steering wheel in straight and hold on!!! MYM puss puss.
BUG-E J said:
Guess who has steering, bitches
Guess who don't need it bitches. You. Hahaha weld steering wheel in straight and hold on!!! MYM puss puss.
BUG-E J
Don't get #labroned
- Joined
- Dec 1, 2010
- Messages
- 5,128
Re:
Well the new ring and pinion showed. I had RCV treat the gears and as always they are one of the best companies in the buisness to deal with. I spoke with them about the process at the expo and they seemed excited about the awesome results they have had. I had my yota gears treated way back in the day and never broke another set. This will be the real world test. Within the next few weeks I should have the baddest lp 60 in the country and I promise the set up will be tested to the limits.
Well the new ring and pinion showed. I had RCV treat the gears and as always they are one of the best companies in the buisness to deal with. I spoke with them about the process at the expo and they seemed excited about the awesome results they have had. I had my yota gears treated way back in the day and never broke another set. This will be the real world test. Within the next few weeks I should have the baddest lp 60 in the country and I promise the set up will be tested to the limits.
zjtrey
Well-Known Member
Re: Mash yer motor - Csc fab buggy
what brand of gears did you break and which brand did you have cryo'd?
what brand of gears did you break and which brand did you have cryo'd?
BUG-E J
Don't get #labroned
- Joined
- Dec 1, 2010
- Messages
- 5,128
Re: Mash yer motor - Csc fab buggy
I "think" I broke usa. These are yukons. It was a 60 and these will be 70 with a load bolt so I don't think manufacturers could be compared on this. But I do agree the gear brand makes a differencezjtrey said:
drycreekjeep
Well-Known Member
Re: Mash yer motor - Csc fab buggy
did u get ur front end back together?
did u get ur front end back together?
mashyermotor
Well-Known Member
- Joined
- Apr 16, 2012
- Messages
- 163
Re: Re: Mash yer motor - Csc fab buggy
Still in processdrycreekjeep said:
mashyermotor
Well-Known Member
- Joined
- Apr 16, 2012
- Messages
- 163
Re: Mash yer motor - Csc fab buggy
Jon has been pretty busy lately so I figured I'd post some pics of the Jana76 conversion progress ...
Jon has been pretty busy lately so I figured I'd post some pics of the Jana76 conversion progress ...
BUG-E J
Don't get #labroned
- Joined
- Dec 1, 2010
- Messages
- 5,128
Re: Mash yer motor - Csc fab buggy
I will say the kit is not that big of a deal to do. Basically jantz has it figured out and has the different spacers and bearings labeled that the biggest part is grinding to make everything fit. The load bolt was actually the hardest part but it was because my lower link mount was in the way of drilling a straight hole. The parts are deff much beefier and with the rcv treated gears I should have no issues!
I will say the kit is not that big of a deal to do. Basically jantz has it figured out and has the different spacers and bearings labeled that the biggest part is grinding to make everything fit. The load bolt was actually the hardest part but it was because my lower link mount was in the way of drilling a straight hole. The parts are deff much beefier and with the rcv treated gears I should have no issues!
