Search results for query: *

I have knuckle designs to run dana 60 components and another to run the large Ford bearings with the Rockwell size shafts. These are only the jigs and all the files you'll need to have the components cut. If you're interested we can talk about a price. Justin (615)308-9372 Murfreesboro, TN...

RCV is getting close to fully release their big bell axles for the Ford hub so who is thinking about runing them? I have designed some fabbed knuckles around this setup and i'd like to hear some input from the guys looking at running these.

Looking for some 40-44 tires, any brand I just need something halfway decent. Closer to Murfreesboro, TN the better Also I will trade a set of these for tires if someone is interested

These seats were out of a CTS and are 6-way power and have seat heat. I got them to swap into an old truck abut 4-5 years ago and they have been collecting dust since then. I paid 400 so I will start the price at that. Located in Murfreesboro, TN (615)308-9372

I'm needing some custom offset wheels and wanted to see if anyone has tried welding on a ring and bolting an aluminum center to it. If so what thickness did you use? I did some simulations on my computer and using a .5" center and a 15,000 lb force there was .000629" distortion from a straight...

I have set of these knuckles that work with dana 60 shafts and hubs $1200 (615)308-9372 Murfreesboro TN

I am getting a I set of these cut and wanted to see if there is anyone else interested while I am ordering them. The complete set is $1,500 and comes with body mounts, suspension mounts, and the pre cut frame material. I can also supply additional parts need as in: Plate style shock towers...

I putting this out here as a feeler to see how many people would be interested in a prefabricated chassis, having all the tubes shipped to you and just have to weld it up. The chassis is based off the ultra 4 style of buggies there is room for bypass's front and rear, with trailing arms rear. I...

Posting this for a friend so its best you call him if you want to look at it or talk about price. Newly built jeep with only two rides and only the best parts on it. Loacted in Murfreesboro, TN Price is $30,000 OBO Now $26,000 If interested in buying it call (615)598-0648 Any technical...

Come with all the brackets 1.25 heims, 2" 7075 links and front shock towers to fit 14" coil overs Used same design on the jeep pictured

I finished this TJ up a few weeks ago Started as a mostly stock 1998 Jeep Tj w/ 80,000 Drivetrain 4.0 ax15 atlas Alxes HP 60 w/ 5.13 cromo axles, CTM joints, Yukon locking hubs Sterling 10.25 w/ 5.13 mechanical locker, disc brakes Suspension Custom 4 link front and rear 1" heims all the...

late model "ribbed" 14 bolt housing. This is bare no gears brakes etc. Prefect to build a front axle out of $200 Mufreesboro, TN (615)308-9372

NV4500 and Dana 300, both have new gaskets and ready to go. In Murfreesboro, Tn $1500 (615)308-9372 [email protected]

Is anyone interested in a modular subframe? It seems like everyone has access to a bender these days but are intimidated about setting one up or take the time to truly square up a frame. I designed this for me because I'm OCD we I build something and spend too much time setting up a jig to build...

I started playing around with designing a racing style chassis to see if anyone would want to have it built. It was designed to run 39's with coil overs and bypasses at each corner with a over all height around 6'.

I'll sell it like it is but with the plates and shock tubes finished on both side and the "hood area" bars bent up located in Murfreesboro, TN (615)308-9372

I'm just wondering if there is a market for people that would want a upgraded C and knuckle thats designed to work with the toyota axle? It would get away from the closed knuckle and it could be designed to run a larger u-joint or a CV. Just trying to see if there is a want for some.

I have designed a lightweight IFS suspension and I'm just wanting to see what ideas yall have to power the steering. I've been looking at a dune buggy type rack and pinion and there seems to be 3 ways to power it 1) Electric assist 2) Charlynn Torque Generator 3) Hydraulic ram assist Im not...

NV4500 adapter $500 Located in Murfreesboro (615)308-9372

High pinion dana 44 8 lug chromoly stub shaft 3.55 gears (615)308-9372 in murfreesboro