• Help Support Hardline Crawlers :

Search results for query: *

  1. matth_85

    Dumb bushing tech questions.

    Sit them on the vice and use a punch to drive out the bolt collar, then the rubber should pry out with some work via pry bar. You will likely have to use a second punch to drive the first punch out of the collar.
  2. matth_85

    Intake flip

    Will have to do something different for oil pressure sender if you are using the factory one. IIRC.
  3. matth_85

    LQ4 LS 6.0 overheating issue

    Are you using the steam port?
  4. matth_85

    The kush-j7 build by 417chevy

    So, the first few pics of the shirtless guy with the rat tail is you right?? And that's your girl.... Are you sure you aren't the real life Joe Dirt?
  5. matth_85

    Batmobile 14 bolt front build

    Same style bearing as a 9". I thought the older 14's ran that style also... With that said, I like my chances with a shitty bearing there as opposed to nothing (D80). Just something you need to keep an eye on.
  6. matth_85

    What RPM Torque Converter

    That's probably the best and most understandable analogy of how a stall speed works I have heard. :dblthumb:
  7. matth_85

    Why would it be so off?

    I guess when I read 6.0 I just assumed this was about a motor in something else...lol. But yes, if it's in a truck clemsonjeep has a very good point. A good way to check that would be to turn the key off and see if all gauges reset to 0.
  8. matth_85

    Why would it be so off?

    My guess would be a bad gauge, or possibly sender. Have you swapped them out yet?
  9. matth_85

    6.0 LS running poorly

    Check from filter to rail, and the rail. My issue was in the rail. Sand was getting on the tops of the injectors and would have a stumble off idle. It would come alive after a second and run fine until the sand collected again.
  10. matth_85

    6.0 LS running poorly

    Have you tried the fuel filter? Possible even if you have that trash has worked it's way past it in the line and is settling on the injectors. I had a 4runner that had the exact same symptoms and it had sand in the rails.
  11. matth_85

    Batmobile mini

    Haha.
  12. matth_85

    Batmobile mini

    Even though your unnecessary babbling annoys the absolute **** out of me, props for teaching your son these things. Good to see kids out in the shop at that age instead of on an iPhone playing some dumb ass game or smoking dope.
  13. matth_85

    wizzo's buggy

    Hell yeah, if Still Hill was wet that is good one.
  14. matth_85

    The kush-j7 build by 417chevy

    That vein in his arm may have popped. That looks unhealthy as fawk. Maybe it's from eating those whamburgers and French cries off that big ball of frozen poopy.
  15. matth_85

    What's the dealio?

    Yeah.
  16. matth_85

    What's the dealio?

    Undo the front steam port and let it run till it has a constant stream of water coming out. Then your system is air free. Then, cap it off or plumb it back however you had it to begin with.
  17. matth_85

    Drive line ?

    Just unhook your shifter and move it all the way to 1 and see what happens.
  18. matth_85

    Drive line ?

    Is your shifter adjusted right? It could be hung between 1st/2nd and causing it.
  19. matth_85

    Compression and rebound valves

    Rebound and Compression ain't gonna matter when they leak out all the oil and nitrogen. Do some research before you buy.
  20. matth_85

    Finally switching to a 6.0 cam question

    What did you go with from them? I just did a LS1 for my 69 Camaro with a lot of their stuff. I should have it going here pretty soon. Ready to see what she will throw down.

Latest posts

Top