Search results for query: *

  • Users: Maverick26
  • Content: Threads
  • Order by date
  1. Maverick26

    22re temp issue

    I got this 22re in my 81 pickup and I have been finding little issues lately that are odd to me. I am almost sure the TPS is bad cause it has trouble idling when warm, stumbles and dies. Runs better with it unplugged. Ever since I installed it, It never really warmed up all the way. I installed...
  2. Maverick26

    Tool Storage?

    Ok, this might turn into a pissing match but I would rather keep it to the facts and not bash any company or person that might own something from that company. With that said, I am in the market for a tool box. I don't want to make payments or spend a load of money on the box its self so I...
  3. Maverick26

    22re surge

    I wanted to start my own thread after seeing Lethe thread on the 3.0 surge issue. My buddy has a 1993 pickup 22re that surges around 1500rpm with no load. It runs fine at that rpm in gear going down the road but just reving it up and holding it there it surges hot or cold. I did a quick look...
  4. Maverick26

    22re swap

    I have been kicking around the idea in my head about doing a motor swap on my 81 Toyota. It has the stock 22r in it now with a weber and I have to say it runs quite well. Cold and hot starts are its down fall but for the most part it runs good... but... EFI runs better. I have looked at the 2RZ...
  5. Maverick26

    Manastash/Quartz Mt run

    Went on a fun ride up around manastash and quartz mt last weekend, not really wheelin since I did it on 2 wheels but its still a fun time in the woods. I started out near Bald Mt./2 pt springs area where I camped and headed to manastash lake at around 8am. Weather was perfect and the place was...
  6. Maverick26

    KTM tires and wheels

    Hey, I am working on getting all the parts to get my bike plated. Its a 2014 Husky but it uses the new style KTM hubs and axles. I would like to barrow someones DOT tires and wheel sets if I can for the inspection. I dont really want to go and buy new tires that I wont use just for one hour of...
  7. Maverick26

    Its new bike time!!

    Ok, I know lots of you guys ride 2 wheels on here and have been for some time. I sold my CRF450x... not a trail rig at all. I am looking at a Husaberg FE250 that is a demo 2013 model. I am just stuck, do I go 4 stroke or 2 stoke. I like riding trails and I want a bike I can move around on good...
  8. Maverick26

    Damage some dogs!

    Im headed east the weekend of Feb 1-2 to do some coyote hunting, going to try and make a few sets on some private land I got hooked up with but I am open to other areas also. Just wanted to start a thread about this on here just in case any of you boys on the right want to hook up and put some...
  9. Maverick26

    Toy Story

    Well, been surfing CL for a while now and finally found the truck I have been wanting. This will not be a wheeler at all, going to restore it over time to be as close to factory as I can with maybe a few common upgrades like cross over power steering and IFS brakes. I want it for a dd/mountain...
  10. Maverick26

    Barber Springs

    Have any of you Ellensburg guys been out Manastash Rd and turned up Barber Springs rd lately? How far up before you get into snow? Planing on a trip over this weekend to maybe camp up at Riders camp and do some dirt bike riding.
  11. Maverick26

    Hydro control valve?

    Im looking for a valve used for rear steer setups sometimes. I know the ol' Money Mark buggy had this setup with a small valve on top of the orbital so that a custom padel steer handle was built. It was a dual action valve but it was a twisting motion that activated it not a push/pull. I think...
  12. Maverick26

    The Budget Door Kicker (BDK)

    I know some of you enjoy gun and for the most part folks like to look at AR platforms so I will share another one of my builds. I have been enjoying the heck out of the SPR rig I built a few months ago but I wanted something lighter, faster, more portable and less accurate/expensive to build and...
  13. Maverick26

    Ford 60 spindle?

    I have tried to google and pirate search but I cant find exactly what I need. I am looking for the bolt circle diamiter of a ford 5 bolt spindle. I know that the bolt holes are not spaced the same but they are all on the same circlular plane. Let me know if you have any ford spindle info. Thanks.
  14. Maverick26

    Cutting splines

    Just wanted to ask before I jumped into this without knowing for sure. I will be needing a few sets of D60 inner shafts cut to length and splined soon and was wondering if there are any shops close to the north end that do it? Im in Arlington but dont really mind driving. I know Jentz Eng. does...
  15. Maverick26

    SPR/DMR Build

    A build thread of a different kind, hope its all ok with the high ups that I share. This is being built to do one thing and that is long rang shooting. It is not a CQB gun at all but it could be used if needed I guess. I am building this for a MagPul Dynamics class in July, it will be pushed...
  16. Maverick26

    Dry Cut!

    This showed up today at the shop! Cant wait to use it. I got really sick of replacing abrasive saws every 6 months or less. And the mess they make sucks too. Most big shops seem to like the dry cut saws and the reviews are very good on the Evolution saws so Im gonna give it a try. 3 year...
  17. Maverick26

    Manual reverse shift VB?

    Just called the tranny guy and to save me some money he said I could source my own parts. So Im looking for a full manual reverse shift valve body for a TH350. He didnt really have any imput on what was good or bad. He did say that some guys have been having bad luck with the compression...
  18. Maverick26

    Dana 60 - 70 shafts?

    I got a few questions before I start building my new rear axle. I have a Dana 70 and a Dana 60 and I would like to use as much parts of both as I can. My idea is, use the 60 housing, buy a dana 60 35 spline spool but can I use the 35 spline 70 shafts? The 60 had 30 spline shafts in it when I...
  19. Maverick26

    Lockers?

    Has anyone had any first had testing of the Yukon Zip lockers? They are air operated like the ARB. or the Auburn Gear ECTED locker? This one is electically operated. There is always the ARB that I know works but I would just wondering if they are as good for less. This is for a customers Jeep...
  20. Maverick26

    Syncro vs. Deversion?

    I am entering the market of buying another new welder. I want to get a tig of my own and I am really happy with the way Miller makes welders so I figured I would stay with them but I am open to better options. I was first turned on by the Deversion 165 or 180. Then on some other forums some guys...

Latest posts

Back
Top