85b2man
Well-Known Member
you wanna see redneck if i can get my buddie to post the pic of the tank i had straped to the hood to move it around with.:redneck:
-
Help Support Hardline Crawlers :
85 b2 build
- Thread starter 85b2man
- Start date
you wanna see redneck if i can get my buddie to post the pic of the tank i had straped to the hood to move it around with.:redneck:
85b2man
Well-Known Member
so i have been busy :awesomework:
Got my arb set up
something is missing
Got my new high output arb compressior mounted just need to plumb it for oba and get a solenoid
made some cool shifters for my tcases
i love these stainless steel mini heims, we use them in the watercraft industry for steering and trim :awesomework:
and then i made the shift levers out of some scrap tube i had lying around.
and finaly put in some extruded metal for luggage in the back
Got my arb set up
something is missing
Got my new high output arb compressior mounted just need to plumb it for oba and get a solenoid
made some cool shifters for my tcases
i love these stainless steel mini heims, we use them in the watercraft industry for steering and trim :awesomework:
and then i made the shift levers out of some scrap tube i had lying around.
and finaly put in some extruded metal for luggage in the back
Last edited:
crash2
-Oh no I picked a side-
Almost ready to get it back out ryan?
85b2man
Well-Known Member
85b2man
Well-Known Member
does anyone have a spare arb solinoid ?
85b2man
Well-Known Member
got my comp wired up and installed for the final time got the oba plumbed man i love how fast that pump pumps up
re did my panel i think it looks decent
pulled the tie rod end off the nuckle and it literaly fell apart here is how stretched out
things i need to do by this weekend
1. new tie rod end
2. get a solenoid and fittings for arb
3. install door bar
4. install other seat
5. finish assembling front end
re did my panel i think it looks decent
pulled the tie rod end off the nuckle and it literaly fell apart here is how stretched out
things i need to do by this weekend
1. new tie rod end
2. get a solenoid and fittings for arb
3. install door bar
4. install other seat
5. finish assembling front end
85b2man
Well-Known Member
so each time i go out i notice things getting louder and louder
(body, trans Exc)
Soooooooooooooo around the end of the month i'm ordering TUBE and a few other things:redneck::awesomework:
So here is my specs
1 3/4 x 134 dom chassis:fawkdancesmiley:
Full hydro
race runner 2.0 air shocks
Fox air bumps :awesomework:
4 link rear
4 link front if possible if not 3 link
2.8 v6. cant afford the 4.3 i have so i will build the chassis to fit it and do that later
Dana 44 high pinion front (for now) ford 9" rear
Fm146 trans with dual cases
36 iroks but building the chassis to handle 40's for future
i'm sure im forget stuff but for now i'm cleaning garage to get ready:awesomework:
(body, trans Exc)
Soooooooooooooo around the end of the month i'm ordering TUBE and a few other things:redneck::awesomework:
So here is my specs
1 3/4 x 134 dom chassis:fawkdancesmiley:
Full hydro
race runner 2.0 air shocks
Fox air bumps :awesomework:
4 link rear
4 link front if possible if not 3 link
2.8 v6. cant afford the 4.3 i have so i will build the chassis to fit it and do that later
Dana 44 high pinion front (for now) ford 9" rear
Fm146 trans with dual cases
36 iroks but building the chassis to handle 40's for future
i'm sure im forget stuff but for now i'm cleaning garage to get ready:awesomework:
