Search results for query: *

does anybody have the number for this guys ad: http://seattle.craigslist.org/oly/cto/2719416080.html i've sent him multiple emails with no reply while he keeps re-listing it. thanks

on this rig: does anybody on here know who built it? the owner doesnt know much about it and im looking to find all the info i can before i make a deal with him. any help is greatly appreciated. thanks

my dad and i are stuck on trying to get the heater to work in my 85 toyota. its blowin air, but no heat. all water hoses going into cab and out of cab are hot at operating temps. things we've already tried: -new thermostat -replaced mechanical valve on firewall -flushed water both ways through...

what year(s) have you guys found the best 57" ford f150 springs to come out of for wheeling? im planning on puttin them in the rear of my yota for a better departure angle over the 63" chevys in there now. also, if you are running them, did you add/remove any leafs or just run them stock...

does anybody know if theres a build thread on this rig? thanks

recently picked up a super clean 85 xtra cab toyota. wanting to put the tons i have in so i can move it around. have 63's in the rear already but debating on what springs to run in the front. heres some things im basing my decision on: - 40 - 43" tires and dont want to cut cab (if at all...

its in a 10 bolt with 4.10 gears under a k5 blazer. thats all i know about it. have any of you guys seen anything like it? truetrac maybe?

got flamed like a mother fawker on pirate for askin but after searchin around im still not findin what im lookin for. wonderin what toyota 4speed trannys and geardriven 21 spline tcases are goin for? also, what about non-turbo 5 speed trannys? (not sure which model, came out of an 86 pickup) thanks

gunna go up and play in the snow this weekend with some buddies. wonderin what im safe to air down to without blowin beads. im running 35x12.5s on 15x10 steelies. rig is a shortbox chevy. want to go as low as possible without blowin a bead. anybody have a suggestion? thanks

wonderin what the correct size of wheel spacer i will need so my hummers clear the brakes and fit as tucked in under the fender as possible? they are goin on a d44 (until i can afford a 60) and 14 bolt under an 86 chevy shortbox. also, wheres the cheapest place i could find these spacers? thanks...

do 16.5" wheels require a double beadlock to keep the tire on or will you be fine with just the outer locked? i know they have the smaller lip or bead holder and beadlocks are the only way to go if you plan on airin down but what about the inner lip? tires come off there too? thanks

wonderin whats the correct/best off road weber carb to get for a 22r as ive seen weber 32/36's, weber 38/38's, and so on. what do those numbers mean anyways? thanks - not sure if this question belongs in the 4x4 talk or tech section so if its in the wrong section let me know, thanks again

i was plannin on buildin a fullsize dual purpose rig but after seeing what fullsizes look like after they come off the trails in washington, my plans have changed. the new plan is either a toyota or sami. i already have fullwidth axles (d44 and 14bolt) that i was plannin on runnin. a lot of guys...

im wondering what you all think about the warn dana 44 front shafts? do they last or not worth the investment? also, if they came out of a high pinion ford 44, will they work in an 8 lug chevy 44? thanks for any input :awesomework:

Jeeping Nomads Annual Swap Meet. And Show & Shine Sunday Sept 13th Mobile Fleet Service parking lot Yakima WA $3.00 admission - driver of a jeep vehicle to the gate gets in free!!!!!!!!!!!!!!!!!!! Lots of Jeep parts. Vendor space available!!!!!!!!!!!!!!!!!!!!!!!!!!! Jeep Show & Shine...

did FF 14 bolts come with 4.09, 4.10, or 4.11 gear ratios? i know they came with 3.73 and 4.56 from factory but what was the middle ratio they came with as i thought it was only 4.10s? also, can you run a 4.09 ratio rear with a 4.10 or 4.11 front or vice-versa or is that couple extra teeth make...

1. will 73 - 87 chevy 1/2 ton front calipers bolt onto an 3/4 ton 8-lug chevy dana 44 front, since disk brake conversions on 14 bolts can either use 1/2 ton or 3/4 ton calipers with 3/4 ton rotors? 2. did 73 - 87 chevys ever come with stock adapters to bolt a 32 spline sm465 to a 32 spline...

1. how much would you guys charge for complete 6 lug 10 bolts? 3.73 gears, new brakes, fluids seals, etc 2. how do you figure out a gear ratio in an axle? im lookin at some 3/4 ton chevy stuff but the guy doesn't know if its 3.73 or 4.10 ratio. any input is greatly appreciated. thanks!

ok so whats the difference between an 1 ton 10.5 ring gear 14 bolt full floater and a 3/4 ton 10.5 ring gear 14 bolt full floater? i have an 86 chevy k10 swb 1/2 ton that im wanting to swap an srw 8 lug 14 bolt and d44 into but wanna make sure i buy the correct 14 bolt so it bolts right in...

tryin to find some wheels for a buddy to put his boggers on so he can run his stock wheels and tires on the street and then put his boggers on when he wants to go wheelin. hes got a '94 ext cab v6 with a 4in tuff country suspension lift. what would be the right amount of backspacing so that they...