Search results for query: *

Does anybody have or know where to get a technical drawing for Dana 44 knuckles? Specifically, I need to know the proper distance between the two ball joint seating surfaces, on accounta one of mine seems to be too short (as in bent) and is causing issues.

The Dodge seems a tad under shocked in the front, and it feels under shocked all the way around with a camper on board. Let's talk about bad ass shocks. You start :D

Helping a friend out... XJ + F250 Dana44 = ? I need to find a good beefy three-link mount kit to put on this 44. What's the best off the shelf setup for a semi-mild trail rig, meaning not a lot of lift and stock arms?

This is somewhat related to the speedo thread. What would be a good scan tool to buy for a '99 CTD? It would be neat if it could do the speedo, and also neat if it didn't cost a bazillion bucks, and very very neat if it actually worked with all the various scanable bits on these trucks besides...

I need to calibrate the speedo on our '99 Dodge 2500. It's got the electronic style that ties into the ABS system. Does anybody near Monroe have a module or something that will do this, via the OBDII plug? Or recommendations on one I could buy that's not too stupid expensive? Thx...

I want some nice telescoping power towing mirrors for the dawdge. Who shall recommend the spankiest available options?

About DNR trail work classes... Somebody was going to get a class lined up for a bunch of us, I think it was you Karl? Any word on this?

You need to explain this please.

I need to get a brake controller installed in the new Dodge. It looks like the wire for the brakes is in the harness, and just from poking around, it looks like it terminates in a disconnected plug right near the clutch master cyl. reservoir. Am I in the right ballpark here? Should I hit the...

Everybody says it's bad bad bad, don't do it! I've done it in the past; when the glow pluggies no worky and the mornings get cold, it's a requirement. Is it THAT bad? What's the dillio?

So I put in some LED tail lights. Then the turn signal flasher wouldn't work, so I put in one of those fancy pants electronic ones, and everything was good again. Tonight I replaced the front turn signal lights with LED's, and now even the fancy pants electronic flasher is dumb. WTF do I do...

Does anybody know where to get 5/16" brake/fuel line tube by the foot? I need about 7 or 8 feet, and all I can find is the 5 foot chunks, or a 25 foot roll. Or does anybody have some they could sell? Thx :D

Does anybody know how to put a "bead" on the end of a piece of tubing? I am referring to the little "bubble" on the end of the tube that keeps a hose from slipping off. I found these: http://store.summitracing.com/egnsearch.asp?N=700+4294925139+4294925137+115+4294803499 But they only go down...

Holy ****, I ordered a universal flaring tool off ebay last week and it arrived today. This thing is unreal. It's friggin' hydraulic. It's got dies for every damn kind of flare on the planet. Website: http://www.mastercool.com/m53.html And I got it here...

Does somebody around has a part number or link or something to a good TBI fuel pump I can hang on the frame? Crashypoo? Crusty needs to finish collecting parts.

I am considering turning a front 44 housing into a rear. My rear axle is only 55" WMS, so I think I could whack some of the long side off and use it to extend the short side. This would give me a rear 44 with 1/2" thick tube. I couldn't bend that if I had to :D I'm thinking I could get a...

I'm considering doing disk brakes on the rear of my 1/2 ton GMC tow rig, using weld on brackets and GM front calipers. I know jobless did it to his old Ford tow rig, and I now demand that he post up his impressions :D Anybody else ever done this or have thoughts on the matter?

Brake pad tech seems to have come a way since I payed any real attention. So what sort of pad should I run on the tow rig? I need a pad that will not fade too badly when hot, and I don't really care how long they last (within reason ofg course). Metalic? Ceramic? What's the scoop?

Does anybody have a tie rod end reamer somewhere near Monroe that I could beg, borrow, or steal?

Does anybody know how much current the average line lock pulls? Or can anybody tell me how many locks you have on what size fuse? Trying to design my wiring before having the locks in hand...