Search results for query: *

I have a 2006 GMC Duramax that I have a couple questions about. I assume the factory tool has the ability to check functions and such of all the existing modules? I have heard that the calibrations can be updated as well, I assume I need a dealer to scan it to see if there are any available...

Is there a link you know of somewhere that explains these diesel tuners and how they work or compares their functions/abilities you could point me to? If not, continue reading and see if you can help me out, haha. It seems there are the "big brand" tuners out there such at Edge, Banks...

Well, I finally bought myself something I could tow with when the time comes. I thought I would post so I can hear all the bad things people have to say about it being a GMC and not a Dodge :fawkdancesmiley: It's a 2006 (LBZ and 6 speed Allison of course) fully loaded Sierra SLT 2500 4x4 and...

I came across this while looking for something else. I thought it was kind of cool and worth a share at least. ~T.J. http://books.google.com/books?id=_-MDAAAAMBAJ&lpg=PA48&pg=PA51#v=onepage&q&f=true

I haven't had to do too much with hydro boost brakes before since I have never owned anything that has had them, nor did any of the shops I worked at service vehicles that would have had them. That said, my fiancee's family has a 32' GM chassis motorhome (mid 90s with about 20K miles on it)...

This was mentioned in another thread a while back, but I think this is pretty cool. As of 1/12/12, SB5800 went into effect which allows the plating of dirtbikes following an inspection at an approved facility (NOT the WSP) such as a repair shop or dealer. From what I know, there is a $100 fee...

Has anyone ever had a problem with the Toyota ADD engaging when it shouldn't be? For instance driving down the road and coming to a stop? An acquaintance at work says that twice now he has been coming to a stop and has gotten some nasty popping/grinding/jerking from the front end on his truck...

So, Ive always been a fan of the look and nostalgic sense of these things, and lately Ive been thinking its time for a change of a vehicle. Im not sure which way I will be going since I have 4 cars currently and my girlfriend has 2, so we are still trying to figure out which way we want to...

...Its the custom BBQ version apparently :rolleyes: I was having trouble with the pump not holding pressure correctly last summer when I installed it in my street car (Mazda RX-7), but never really looked into it because I needed new jets to tune the Holley carb anyway. Over the winter I...

So, the body lift which was on the truck when I bought it has taken its toll on my cab floor and punched one of the mounts clean through. I had been meaning to take the body lift off anyway but have been held back since I need to relocate the shock hoops, cut the core support for the steering...

Ok, so Im a complete newbie with Holley carbs, but Im far from incompetent I would hope, haha. I have a Holley 4160 (I believe) which has a vacuum secondary system that isnt working. I verified this twice by using both the bread tie and the paperclip tests (putting each on the vacuum pot shaft...

If you have a Marlin Crawler, All-Pro, Trail-Gear, Badlands, built by whoever, or whatever bumper, could you do me a favor? Im looking for a measurement from the bottom of the front cross member area (with all the holes in it) to the surface which your winch mounts on. NOT the bottom of the...

Simple question Im debating. Should the oil/water separator be right after the compressor before the tank, or after the air leaves the tank like a typical air compressor at home? In case it matters, Im using a York. ~T.J.

The bed on my 84 Toyota is in decent shape, but the holes in the floor where the roll bar mounts have rusted out pretty bad. I know most of you will roll your eyes and say to ditch the thing, but for some reason, I like the look of it. So, my plan is to pull it out, patch/reinforce the floor...

Well, I just thought I would post a little feedback now that Ive used my Smittybilt XRC8 about a dozen times now. I should preface this by saying that this is the first winch Ive ever used, however, Im impressed. When I went shopping for a winch, it was one of those things I knew I wanted, but...

I dont know what else to call them. Im looking for QUALITY crimp connectors for a large wiring project I have coming up (custom wiring harness for a car), and I dont like using the cheesy PVC/Vinyl insulated connectors. Normally I get the non-insulated and just solder the terminals and use...

Where can I get some ratchet straps to hold vehicles on a trailer? Im trying to get myself setup with new stuff. Ive always used chain and load binders that I borrowed in the past. I want to get myself some straps as well as chain and load binders, but Im not sure where to look, or even what...

Included with my shock hoops, are 4 gussets that are meant to be cut to length and installed from the frame rails to the hoop for extra support - obviously. How many people install these? It seems like Im seeing a lot of pictures of peoples trucks without them installed (as I type this, the...

Ok, so Im trying to set up shocks for the first time, and Im having trouble deciding which shocks to run on my truck. I have both 12" and 14" 5125 Bilsteins. Im trying to figure this out for the front. The rear is ok, Im pretty sure Im using the 12" shocks. I could actually probably get away...

So, I got one of these kits, but it didnt come with a zerk fitting for the slip section. I figured it was no big deal and I would just run down to the store to get one. No such luck. Napa and Carquest both have nothing that will fit the threaded hole in the driveline. I went through their...