Search results for query: *

The one for my 4Runner?

I've never been able to find my battery drain and despite having 3 Odyssey batteries, I still have to charge every time I have to start my rig if it's left for more than a week or so. So, after trying over and over with my regular charger, I find out that a special charger is made for these...

So, I'm wiring up a quick disconnect for a winch. I need to solder the 2 guage wire into the connector. I bought some flux core solder but I cannot get it to stick to anything. How do I solder this copper wire into the connector? There's has to be a trick or a solder type that works best, may a...

Well, not yet:haha: But it is coming along. We got a good chunk of work done today. Ralph spent the first hour hauling some guy in a sami back on the road. Apparently late last night, he went off the road and down an embankement. He must have been wheeling by himself as he was apparently...

I've got a Warn M12000 that was acting up. The solenoids would click loud in both directions and every once in a while the motor would engage. I took it in to have it looked at. I was told that the brushes were rusted up again even though they were new. So, an hour's labor and the motor was...

Thanks to the guys who helped me with a pic of this. This is for the people that have been backroom complaining about the direction of the Rainier Vista. Apparently there are some that are upset that the little tire vehicle won't be able to run the Rainier Vista any longer. So to be perfectly...

Well, in keeping with tradition on my runner, my new doors are probably a little overkill. I'm not done with all the finishing touches yet. K2Blazen with nice enough to lend me his bender to get the majority of the tube work done. Along with the harbor freight kinker and tube notcher the...

Anyone out there do work on quads and such on the side? I have an Xtreme ATV quad with a 125 motor. That motor busted a crank outside the case. It still started and ran fine but wouldn't move. I have two other bottom ends for this motor but don't have the time to make the swap. I have a second...

I spent quite a while today talking the Juan, the tech and repair guy at Premier Power Welder about batteries. He gave me a LOT of good info about batteries. I have my unit in there for repair. Turns out that the way it was mounted was causing the case to flex and was grounding out the...

So, I tackled my steering problem of not being able to turn fully to the right. I found a bump stop that was hitting and was bent. I took this out but it still didn't turn any farther. When turning to the right, I hit a hard stop, like the steering box hit it's lock, but when turning to the left...

I found an SM420 mated to a Rockwell Transfer case. From what I've been able to find, these are pretty strong, they have the passenger side drop and centered rear that I need. What I don't know is how LONG they are and I can't find that info anywhere? This is of a 1960 Chevy 3/4 ton, still...

So, I'm looking for a harness setup for the Willys. Anyone have comments or suggestions on good ones that they have or are using? I need to order a set shortly.

I saw this add on Craigs list. Cast Iron Granny 4 speed truck transmission. Not sure what it came out of. probably mid 50's through 70's. the transmission, only, is available. It's complete with top shift stick. it is together, and complete. Any thoughts on what I can have the guy look at to...

Ceg, I've got a few guys heading to Juniper Dune on May 17th (Sunday). Anyone over there that can show us around?

I'm looking at the most recent map. http://www.fs.fed.us/r6/mbs/projects/evans-creek/evans_final_ea_appenidix_l.pdf Can you tell us how an ORV licensed vehicle obtains legal access to the trails? I don't see where it is on this map. I see the 50" wide access for ATV and motorbike, or street...

Elbe 01-03-09 It was a long day of very little mileage.... The group left the campground heading for the busy. Jaydog and JRGaylor decided to run Sunrise and meet us over where the mainline starts. They ran into a few deadfalls across the trail that they had to clear out and about 400 yards in...

Wasn't shopping for one, but it was pretty. No pics yet, it was dark by the time I got home with it. 2003 F359 Super Duty XLT with the 7.3l power stroke. Only 65K miles on it, VERY clean and and it has a few nice upgrades. 6" Suspension lift and sitting on 37x13.50 Toyo Open country Tires and...

I just saw this. http://www.pnw4wda.com/forum/viewtopic.php?t=3776&sid=b6ad98c90f4fe21eeade4db69802f31c

So, getting ready to go to Elbe this weekend and I start checking everything over. I find out that my alternator isn't charging... at all. I have a Premier Power welder and Crash did the wiring but getting in touch with him, we ALL know how tough that is. There's a plug with 3 wires coming out...

It was getting lonely sitting in the garage. When I parked it after the last trip everything was fine so I wasn't expecting to need to do much to go out tomorrow... One of the Orbital's was dead... 4.9 volts and it won't take a charge... classic. I found another battery to stick in there and I...