Search results for query: *

'96 toyota tacoma 3.4 V6 with about 180k on it completely stock motor. Been having some issues for awhile and threw a P0171 code which is lean condition. I pulled the MAF and cleaned it. After that it would start and idle roughly at 500rpm and if you applied any throttle it would die. I pulled...

Just tearing down the front of my truck and noticed that the pitman arm is super loose on the splines. It is the billet reduced drop one from Sky. Anybody else have this problem...normally those things are on there super tight. Trying to decide if I should call them up and bitch or if it's just...

My buddy has a '81 2wd yota with a good cab and a '83 4wd with a not so good cab. How is the 2wd frame for doing an SAS on? I haven't had a chance to compare them yet but I thought I had heard they were a little bit better shaped frames? We want to redo the suspension anyways during the swap so...

So I'm in the process of fixing a bunch of crap on my truck that's messed up. One of the things is where the battery mounts on the inner fender. When you do a swap on a Taco you have to trim a bit of the inner fender out for the steering box and after time it has started collapsing under the...

Anyone know a part number or application for Toyota wheel spacer studs? I snapped off 3 of them when I lost my wheel bearing awhile ago and need to get them replaced. This is for 1.5" spacers but don't think that matters

Just pulled the trigger on this a few minutes ago... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=120213603317&ssPageName=STRK:MEWA:IT&ih=002 Should be a good base to start building off of. I am totally new to the electronic side of this hobby though...coming from a nitro car. Still...

Any special tips I need to know to mig stainless? I have to repair a water bath tank at work that has a ton of large hols in it. Material is 18ga and I have trimix gas and stainless wire. I'm going to take a couple practice passes on monday to see how it goes but the welds I do make have to be...

Not very hardcore...but a necessary evil on DD's. I have my license plate mounted on the tailgate and was using bolts with leds in them from Summit but the output wasn't very good and they both burned out after about 3 months. Any ideas to get this sucker lit up better?

Looking for a 37ish tire that will wear well for daily driving and have decent traction. I was actually thinking about *cough* MTR's *cough* but wasn't sure how they wore for road miles. (note:they will not be my offroad tires) I have toyo's on currently and am not to happy with them being...

Other day my clutch pedal starting acting up on me not returning all the way. So I checked the fluid and low and behold the MC had run down to where it was close to sucking air. Filled it up but didn't bleed it because I was in a hurry and the clutch actually got worse. So when I got a chance I...

Just wondering who has the best price on a set of 15x8 cast beadlocks...think they are MSRP'ed at $289 but wasn't sure if they could be had for cheaper. Trying to figure out if I want to be cheap and do Longfield DIY steelies or get some nice luminumy ones

Am I just an idiot (don't really need to answer that one :D) or why can't I find premade up brake lines with 10mm x 1.0 inverted flare fittings on them. NAPA looked at me like I had no clue what I was talking about and every vehicle came with standard fittings on it. I was able to find some...

I am getting ready to buy springs for my rear and am trying to decide which ones to go with. Allpro's are on sale now but I don't know what the quality is on them. I need to get some new front springs eventually too I have Marlins old springs on my front and they are junk. I like the fact that...

What guage of steel should I use for patching up the firewall after the hacking has commenced. I would think 14-16...something that can be formed to the shape of the firewall but also strong enough to take some abuse. Also any thing special like cold rolled or ???

Went to TSF on Saturday with some of the Oregon TTORA guys and had a blast. Truck performed good and finally had a chance to run it through part of the crushers.

So I have been getting a clacking noise from my drivetrain lately and it has been puzzling the **** outta me. It happens when the truck has been sitting for a few hours...I take off and go a few hundred yards then when I decelerate something starts clacking. Turns out it is my square front...

WARNING: Hardcore tech ahead! :fawkdancesmiley: So I have been tasked with figuring out what is a good 4" lift these days for a '86-'95 yota truck. (I secretly want to rip my SA out and go back to IFS:redneck:) But anyways looking for what a good lift...for my friends truck...would...

So I am getting ready to call up PSC and order some parts. I have a feeling they are just going to want me to send my ram in to have the shaft replaced but I am trying to get this going by next weekend. It looks like there is a cap with holes for a spanner wrench to remove it. Anyone ever taken...

I am going in with a friend on a new welder just so I have something to work on my truck with again. We decided to go with a 180A unit just because neither of us has the money for a 210. I have always been a true blue fan myself and haven't actually used a Lincoln. My buddy at airgas wants me to...

What are you using to mount your ram to the T/R. Just welding tabs directly to it or using some kind of a clamp. I've seen a few sweet clamps before but mostly they were one offs. Since I went to a 1.25 T/R my old booty fabbed clamp doesn't fit anymore and I need to get my steering up to par for...