Search results for query: *

I took my t-case apart in search of a odd noise i suspected was coming from there, all looks good. No metal shavings no worn teeth. What parts do you guys running these see failing first. Bearings, Sleeve bearings? My problem is im running Chevy 4L60E, downey adapter to Toyota topshift, im...

I just took apart my t-case to inspect the internal parts, and all looks good. I need a gasket kit asap. My question is does anyone know where to get a gasket kit same day for this case. I called toyota and they said they could order one, and i blew my opportunity to get one before the...

Anybody know of a website or a good place up north to purchase poly/bushings something like in the photos below. Im going to build a t-case cross member support and need some of them. Like the one in this photo in the back by the socket wrench. Or the ones on each of these corners...

Finally got my project back on the road after a long couple years. Any ways Im running toyota t-case adapted to 4L60E. I really don't no to much about this t-case but maybe with what Im describing below some one might be able to point me in the right direction. So here is my best description...

Hey, Im gone on a road trip and i need to swap tires, I have a good set of tires but there mounted on the wrong bolt pattern, what the going rate for getting these swapped. And where would you suggest going. Schawb, Discount? Thanks

Borrowed a battery charger. Got a brand new battery that has gone dead, I know there are certain steps that need to be done when charging a battery, i just dont know them. Trickle charge? 6Volt 10Amp 12volt 2Amp 12volt 10Amp These are 3 of my 4 options on my charger 4th is 55amps for...

I put a 98 4.3 Vortec in my 95 v6 4Runner. Im using the stock GMC harness. Downey says that i can use my stock fuel pump, I have everything wired up. I can crank it over, and all my ignition is hooked up bla bla bla. As of right now i cant get it to start up. After doing some reading and...

Got a 98 Vortec Engine, Harness And ECM, ECU, whatever. Didn't want to pay to get the VATS removed so i got a 97 computer, that does not have VATS, only question is my 98 had 4 main connectors RED, BLUE WHITE, BLACK. The 97 has the same but between the two sets of connectors there is another...

So I am working on my swap, I've got a 95 4runner auto v6 swapped in a 4.3, used A A adapter from 4L60E to 80s top shift t-case. Problem, went to hook up my stock 95 drive shaft to the t-case and the bolt pattern is different. What are my options, can i get a different flange on the T-case...

Ive got my 95 4runner with a 4.3 in it. Doing the cooling right know. I got rid of the mechanic fan didn't have room for it. Anyways I was wondering how people have been mounting there Electric Fans. I have room for either side of it meaning in front of the Radiator or Behind Radiator. The...

Ive got a 98 4.3 liter vortec that i put in my 95 4runner. Im working on the fuel system right now. Fuel supply is 3/8" tubbing and return is 5/16. Im doing new 6AN fuel supply and was wondering if i can go 6AN back? Does it mater on the return if i go with a bigger line?

All right, yes im going to ask it. What the heck is AN, is there some sort of conversion to standard, or am i way off. On my vortec swap im redoing all of the fuel lines. 3/8" supply 5/16 Return, thats whats stock. So now im shopping around for fuel fittings and other fuel related stuff and...

All right if got a question, so my jeep craped out on me just as i was getting on the freeway the other day. Was going about 5 mph and then it just stalled out. Got it towed home. Engine turns over just want start. So i changed the fuel filter just for kicks, nothing happend. next i took...

Sorry for the lengthy thread ahead Project: 98 4.3vortec CMFI Centrol Port Computer going into 95 V6 3.0EFI Anyways im trying to see if i cant use the exsiting wiring harness from vortec motor instead of buying a stripped down after market harness. I have never really done any vehicle wiring...

Looking to get a different output shaft put in my 4l60E transmission, Been getting quotes from 700- 200 bucks. I have the shaft from downey. Just need it swaped out. for the shaft thats in it now. Anyboady out there that can do it cheaper and know what there doing. In the downey manual it...

Hey I got this welder from may dad. Was sitting in his shop still never been used. Any body got any input on this welder, Back when i was in highschool i took metals class, did TIG & MIG but no stick. Ive been trying to read up on this welder and see its capabilities. Im just trying to figure...

Anybody know of places to get ecus re-programed, 98 4.3vortec ECUs, need vats removed, and figured I would take care of the other stuff as well Ratio, Shift points ect..... I think i can get a 97 and early ecu and it want have VATS, but if there is a place then can flash them that would be...

Hello, just had some questions about which route i should go on 97 4.3 vortec swap. I currently have all of the gm chassis and engine wiring harness, and everything else that was stripped from the Jimmy. I really dont have any experience or background with Electrical stuff. After looking at...

Hello Im lookin to get some tig welding done, any body out there want to help me out, and what would it cost to get it done. Live in north everett but can drive if its not to far. triangular piece is 3 X 6

3.0 3vze Is Out "Its Alive" Well after a few good long hours, the 3.0 is out, know its time to wire up the vortec get my motor mounts put in, and adapt my GL430E to the -t-case (Advance Adapters). Ill try to post some pics later. :D